Pages: 1 ... 7 8 [9] 10 11 ... 13
Author Topic: LC/NLS  (Read 31246 times)
Sandstorm3k
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 83

Leon 1M 1.8T AUQ


« Reply #120 on: December 02, 2019, 04:40:36 AM »

Hello there, let me introduce myself. I got my first car a year ago, a 1.8 125hp leon 1m. I liked it a lot and decided to save up for a nice 1.8T 1M which i have now. The car had been chipped by two local dutch companies before, both of which i have the dyno runs. It puts down around 260HP which is plenty for an FWD car imo. Anyway, i got totally hooked on the idea of tuning my own car. I have some experience with programming (HTML5, PHP, C#) so i figured i could learn this aswell. I started doing a lot of research and got into "tuning" some stock ECU files i'd gotten off the internet just for the purpose of learning. Now i ofcourse also came across this amazing website which has tons and tons of useful information.

Anyway, last week i read some stuff about the apparantly very popular LC/NLS/2step script. So i decided to get more into it and read about the subject, pro's and con's and so on you guys probably know alot more than i do. I read my ECU bin using a Kess V2, no problems there. Then i proceeded to add the launch.php script also no problems there, and finally corrected the checksums as one should. It all seemed to be perfectly fine and i checked the file in a hex editor and didn't see anything that looked extremely unusual to me *im still a noob on the subject though*.

Also i used both a MPPS device and KESS v2 to read the ECU just to be certain the two files were equal.

Now when i decided to flash my car i took all the correct precautions, disabled all possible electronics and hooked up a battery charger to the car and to my laptop. Now strangely when i wanted to flash the new file it failed at just 2% into the flash and i followed the next steps KSuite gave me. I thought i'd totally messed up my ECU but strangely my car still functions completely fine even though the flash failed. (Requesting ID and Reading the ECU before was no problem though).

Now my question is if there is anyone who can help me in the right direction into what possibly might have gone wrong. Im not asking anyone to modify the BIN for me because i really just want to learn how to do it properly myself. Right now i don't really want to try again considering i might just brick my ECU alltogether.


Help would be greatly appreciated! Thanks in advance. (If requested i could add my original file and the edited one) if that might help into finding what went wrong.

Logged
nyet
Administrator
Hero Member
*****

Karma: +475/-75
Offline Offline

Posts: 10728


WWW
« Reply #121 on: December 02, 2019, 09:57:54 AM »

Merged with master NLS/LC thread.

Ditch NLS/LC unless you are able to do the ASM patches yourself, from scratch.

Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Sandstorm3k
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 83

Leon 1M 1.8T AUQ


« Reply #122 on: December 03, 2019, 07:06:53 AM »

Merged with master NLS/LC thread.

Ditch NLS/LC unless you are able to do the ASM patches yourself, from scratch.



Very well, i am interested in doing so myself. I don't understand why such a script is "popular" when many people discourage you from using it.

Nevertheless where would one start on doing manual patches?

Is it as simple as just blindly following this thread
http://nefariousmotorsports.com/forum/index.php?topic=607.0title=
and adding the exact same changes or is there more to it if so would you have any sources where i can learn more about it
Logged
nyet
Administrator
Hero Member
*****

Karma: +475/-75
Offline Offline

Posts: 10728


WWW
« Reply #123 on: December 03, 2019, 11:59:44 AM »

Very well, i am interested in doing so myself. I don't understand why such a script is "popular" when many people discourage you from using it.

Because the demographic that desperately wants NLS/LC for free generally isn't smart enough to listen. I don't know how on earth you suggest me changing that.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +475/-75
Offline Offline

Posts: 10728


WWW
« Reply #124 on: December 03, 2019, 01:21:07 PM »

Is it as simple as just blindly following this thread
http://nefariousmotorsports.com/forum/index.php?topic=607.0title=
and adding the exact same changes or is there more to it if so would you have any sources where i can learn more about it

The first page of this thread has links to what you are looking for. Be advised, it isn't easy to get right.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Sandstorm3k
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 83

Leon 1M 1.8T AUQ


« Reply #125 on: December 18, 2019, 07:18:18 AM »

Because the demographic that desperately wants NLS/LC for free generally isn't smart enough to listen. I don't know how on earth you suggest me changing that.

I guess not, but it did seem like an excellent easy solution. Will definitely read into the subject more, thanks for the link.
Logged
SGtuners
Newbie
*

Karma: +0/-5
Offline Offline

Posts: 2


« Reply #126 on: December 30, 2019, 05:15:39 PM »

II need Launch Control (5000) (40km/h) and NLS.

File of 512kbs (from Audi S3 (210))
Logged
BlackT
Hero Member
*****

Karma: +36/-18
Offline Offline

Posts: 730



« Reply #127 on: December 30, 2019, 05:34:39 PM »

Here you go
Logged
nyet
Administrator
Hero Member
*****

Karma: +475/-75
Offline Offline

Posts: 10728


WWW
« Reply #128 on: December 30, 2019, 06:10:56 PM »

II need

For fucks sake.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +475/-75
Offline Offline

Posts: 10728


WWW
« Reply #129 on: December 30, 2019, 06:12:25 PM »

Merged with the master fuckstick thread
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
AstonWaddo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #130 on: January 02, 2020, 04:40:33 PM »

Hi, not very good with mapping the ME7.5 only ever messed about with diesels
was wondering if someone could help me with putting launch control and pop and bang on decel
on the attached file
thanks Grin
Logged
ebugauge
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« Reply #131 on: January 11, 2020, 04:54:33 AM »

Hi,
I really would like to have a launch cortrol in my 2.8 VR, but I have problems to find some maps. The locations I have tried didn't work since it never revs higher than the lower RPM limit. I attached my .ols file, maybe it could help you finding the missing maps.
I would be very thankful if someone could help me.

I can't find:
ITNMXH
TNMXH
FTOMIN
ESKONF

Greeting  Smiley
Logged
dilly
Sr. Member
****

Karma: +10/-35
Offline Offline

Posts: 283



« Reply #132 on: January 12, 2020, 09:08:23 PM »

use the script. might blow it up but you live and you learn
Logged
nyet
Administrator
Hero Member
*****

Karma: +475/-75
Offline Offline

Posts: 10728


WWW
« Reply #133 on: January 13, 2020, 12:09:09 AM »

use the script. might blow it up but you live and you learn

Tragically terrible advice. DO NOT USE THE GODDAMN SCRIPT

Merged with master moron thread.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
ebugauge
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« Reply #134 on: January 18, 2020, 07:29:20 AM »

use the script. might blow it up but you live and you learn

I used it and I got the script working but I would still like to find these maps. ESKONF for example could be very interresting for other things like sai or rear o2 sensor delete. ITNMXH and TNMXH are also pretty important for me to implement soft limiter launch control. Would be great if someone could help me.
Greetings  Grin
Logged
Pages: 1 ... 7 8 [9] 10 11 ... 13
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)