Pages: 1 ... 14 15 [16]
Author Topic: LC/NLS  (Read 63855 times)
ImKritical
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 9


« Reply #225 on: February 25, 2021, 09:04:15 AM »

I successfully did a stage 1 on my car, some more boost and some fuel, pops and bangs, and than i wanted to add LC and flatshift (i attached my xdf and bin) and after flashing new map, car won't start, when i push the clutch pedal to start the car, EPC flashes and check engine light and i can hear throttle body move and when i turn the key to start it just wont crank, than i let the clutch pedal out and EPC and check engine stops flashing. I can't figure out what im doing wrong, i did the same thing to my friends car and it works grate.
I flashed my car back to stage 1 tune and it starts fine, so i must be doing something wrong.
I have the usa version where i have to push the clutch to start maybe thats the reason?
Logged
nyet
Administrator
Hero Member
*****

Karma: +522/-126
Online Online

Posts: 11454


WWW
« Reply #226 on: February 26, 2021, 04:28:29 PM »

merged to master moron thread

http://nefariousmotorsports.com/forum/index.php?topic=9014.0
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
selveti
Newbie
*

Karma: +0/-11
Offline Offline

Posts: 14


« Reply #227 on: March 17, 2021, 02:33:42 PM »

can anyone help me how to implement the LC NLS on me7.5 512mb

i can use the script in 1024mb but in 512 its not working can anyone explain me more simple thanks
Logged
nyet
Administrator
Hero Member
*****

Karma: +522/-126
Online Online

Posts: 11454


WWW
« Reply #228 on: March 17, 2021, 04:23:43 PM »

can anyone help me how to implement the LC NLS on me7.5 512mb

i can use the script in 1024mb but in 512 its not working can anyone explain me more simple thanks


let me guess this straight: you aren't even aware that you are the OP of the master moron thread?

Merged. This is hilarious
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
bamofo
Sr. Member
****

Karma: +28/-1
Offline Offline

Posts: 319


« Reply #229 on: March 18, 2021, 11:17:35 AM »

can anyone help me how to implement the LC NLS on me7.5 512mb

i can use the script in 1024mb but in 512 its not working can anyone explain me more simple thanks


He is right i didnt notice that lol. If you PM me i can help and then share the file when its done.
Logged
selveti
Newbie
*

Karma: +0/-11
Offline Offline

Posts: 14


« Reply #230 on: March 19, 2021, 10:36:24 AM »

i am trying to put code manually but i dont know what code i need to replace with any help the script cannot find space in my file
Logged
nyet
Administrator
Hero Member
*****

Karma: +522/-126
Online Online

Posts: 11454


WWW
« Reply #231 on: March 19, 2021, 10:37:35 AM »

i am trying to put code manually but i dont know what code i need to replace with any help

did you read the first 5 posts in this thread?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
ImKritical
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 9


« Reply #232 on: March 22, 2021, 05:32:34 AM »

Anyone wanna guide me in the right direction ? I coded lc manually without the script, changed location multiple times, i had D7 40 06 02 03 F8 in 6 places so i tried all 6 and flashed my car each time, and none of the new calls worked, car didn't start every time. Could the code be wrong? even a small tip would be very helpful
Logged
nyet
Administrator
Hero Member
*****

Karma: +522/-126
Online Online

Posts: 11454


WWW
« Reply #233 on: March 22, 2021, 04:22:14 PM »

Anyone wanna guide me in the right direction ? I coded lc manually without the script, changed location multiple times, i had D7 40 06 02 03 F8 in 6 places so i tried all 6 and flashed my car each time, and none of the new calls worked, car didn't start every time. Could the code be wrong? even a small tip would be very helpful


Did you read the first 5 posts in this thread?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
bamofo
Sr. Member
****

Karma: +28/-1
Offline Offline

Posts: 319


« Reply #234 on: March 23, 2021, 07:09:19 AM »

Anyone wanna guide me in the right direction ? I coded lc manually without the script, changed location multiple times, i had D7 40 06 02 03 F8 in 6 places so i tried all 6 and flashed my car each time, and none of the new calls worked, car didn't start every time. Could the code be wrong? even a small tip would be very helpful


PM me your rom and i can take a look or share it here. what your looking for is the match that has TSRDLYN loading right before it.
Logged
stuydub
Full Member
***

Karma: +8/-5
Offline Offline

Posts: 61


« Reply #235 on: March 23, 2021, 07:43:56 AM »

PM me your rom and i can take a look or share it here. what your looking for is the match that has TSRDLYN loading right before it.

Already done it
Logged
ImKritical
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 9


« Reply #236 on: March 28, 2021, 02:43:46 AM »

Thanks for the help, your file still did not work but at least my car started since the call was in the right place, and after changeing ftmon to the right one LC and nls works perfect.
Logged
Pages: 1 ... 14 15 [16]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)