Pages: 1 ... 16 17 [18]
Author Topic: LC/NLS  (Read 90914 times)
maxXAM
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 9


« Reply #255 on: October 08, 2021, 02:41:45 PM »

Logged
maxXAM
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 9


« Reply #256 on: October 08, 2021, 02:43:00 PM »

Logged
maxXAM
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 9


« Reply #257 on: October 08, 2021, 03:17:15 PM »

i made an xdf for my aa-boxe based on nefmoto m-box xdf i used Beyond Compare 4 software to compare the 2 bins searching for maps addresses
so i made 2 files
file 1 stage 1 tuned file + soft limiter
file 2 stage 1 +  2stepscript

i tried the 2 files first one all good  my car gets more power more boos its about 15psi    soft limiter works great the other file the 2stepscript added not working maybe its because my car got tip trany so i want to add brake paddle to get it work i am not using this   2stepscript  for launch control i need it  just for show   
Logged
nyet
Administrator
Hero Member
*****

Karma: +544/-134
Offline Offline

Posts: 11730


WWW
« Reply #258 on: October 08, 2021, 03:47:36 PM »

Merged with master thread.

Please read the first few messages.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
maxXAM
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 9


« Reply #259 on: October 08, 2021, 05:30:23 PM »

is there any way to make this  2 step script work on automatic s4 maybe using brake paddle signal to trigger the code some one help me please to make this happen i love to get some people impressed when my s4 shoot flames  some one  told me i have to  change the jump to nls code from clutch to brake paddle but i don't know how
i successfully run the  2 step script on my aa-box file and   flashed back to the ecu car started ok no fault codes every thing normal but no antilag its wont work may some one help me to make this  script to work on automatic s4
here is my ecufile and xdf 
Logged
nyet
Administrator
Hero Member
*****

Karma: +544/-134
Offline Offline

Posts: 11730


WWW
« Reply #260 on: October 08, 2021, 06:27:54 PM »

stop creating new LC threads.

this is your only warning
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
maxXAM
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 9


« Reply #261 on: October 08, 2021, 07:05:53 PM »

ok sorry  Grin this my first post 
Logged
Marty
Hero Member
*****

Karma: +213/-270
Offline Offline

Posts: 1959


« Reply #262 on: October 10, 2021, 10:45:38 PM »

WTF is a brake paddle?
Logged

maxXAM
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 9


« Reply #263 on: October 11, 2021, 05:30:47 AM »

WTF is a brake paddle?
sorry i mean brake pedal i ask if i can use the  brake pedal to activate the anti lag on the tiptronic
know i flashed l-box bin on my aa-box to try it out its runs good without any issues ,i did this   because i can't find any tune or xdf for my aa-box and i know the both m-box and l-box using the same xdf so now i got l-box instead and full xdf to work with .
i been reading the ME7.x_LC_NLS_rev003 pdf over and over know i got little knowledge about it
Logged
nyet
Administrator
Hero Member
*****

Karma: +544/-134
Offline Offline

Posts: 11730


WWW
« Reply #264 on: October 11, 2021, 01:26:29 PM »

Please read the first few messages in this topic.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: 1 ... 16 17 [18]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)