Pages: 1 ... 17 18 [19] 20 21
Author Topic: LC/NLS  (Read 208637 times)
stuydub
Full Member
***

Karma: +24/-12
Offline Offline

Posts: 227


« Reply #270 on: October 24, 2021, 12:24:54 PM »

But the author of the post wrote that both functions can work in one file, at least that's what the google translator told me, sorry for my English

It does work with both in same file been tried and tested numerous times
Logged
beszesc
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #271 on: November 18, 2021, 10:45:58 AM »

Hello. I have problem with this ecu from BEX. I have few version of script launch control, but none works good with this flash. One time car don't start right away. Second time the car started, but after time ecu reports checkum error. Reflash help on short time and situation repeats itself. Anybody help me? Before I never have a problem with script. I try change NLS counter adress, but it is wrong way.
« Last Edit: November 18, 2021, 10:48:13 AM by beszesc » Logged
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #272 on: November 18, 2021, 11:46:41 AM »

Hello. I have problem with this ecu from BEX. I have few version of script launch control, but none works good with this flash. One time car don't start right away. Second time the car started, but after time ecu reports checkum error. Reflash help on short time and situation repeats itself. Anybody help me? Before I never have a problem with script. I try change NLS counter adress, but it is wrong way.

Looks like you did not do the CSM./ If your file is right this file is checksum'd correct
Logged
beszesc
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #273 on: November 18, 2021, 01:09:38 PM »

I'm sorry, of course my bin which I posted have errors now, but when I flashed ecu I check checksum twice. Maybe I change something last time.

On this bin car don't start also when I made some kilometers, although checksums are correct in me7sum.





Logged
Sandstorm3k
Sr. Member
****

Karma: +10/-14
Offline Offline

Posts: 403



« Reply #274 on: January 18, 2022, 02:01:23 PM »

After patching the temp check out of the 1ML906032 file it worked flawlessly on a 50.000 mile BAM engine.

Until the almighty BAM went 'BAM'.

Upon further investigation it seems as if the valves and pistons are intact, but the head gasket let go. Cool piece of code, but definitely not worth the risk on a stock turbo/stock engine FWD. Save your stock engines & turbo('s)  Roll Eyes


Edit: blew the engine, bent rod. Did still run though with a hole in the engine.

« Last Edit: September 28, 2022, 03:38:53 PM by Sandstorm3k » Logged
Sn0w3y
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #275 on: September 27, 2022, 03:01:45 PM »

Hello guys,

today i tried to add LC and NLS to my Files Tongue

i successfully added LC and i thought NLS aswell - i did not use script BUT i orientated myself on the .pdf v3 Cheesy

can somebody just give me a hint so i can learn what i did wrong?

Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #276 on: September 28, 2022, 05:14:35 AM »

Hello guys,

today i tried to add LC and NLS to my Files Tongue

i successfully added LC and i thought NLS aswell - i did not use script BUT i orientated myself on the .pdf v3 Cheesy

can somebody just give me a hint so i can learn what i did wrong?


You dont need NLS beacuse it work really bad, 200ms is to slow to gearbox, and after shifitng you will have masive retard and power loss
Logged
Sn0w3y
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #277 on: September 28, 2022, 08:58:34 AM »

You dont need NLS beacuse it work really bad, 200ms is to slow to gearbox, and after shifitng you will have masive retard and power loss

I want to have it so bad even if it works bad Cheesy

so i should set it higher? Which ammount of ms do you recommend?
Logged
Sandstorm3k
Sr. Member
****

Karma: +10/-14
Offline Offline

Posts: 403



« Reply #278 on: September 28, 2022, 03:37:46 PM »

I want to have it so bad even if it works bad Cheesy

so i should set it higher? Which ammount of ms do you recommend?
Pay someone
Logged
Sn0w3y
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #279 on: September 29, 2022, 01:36:04 AM »

Pay someone

Already solved - thanks !:)
Logged
JeanAwt
Full Member
***

Karma: +8/-9
Offline Offline

Posts: 193


« Reply #280 on: April 18, 2023, 10:05:36 AM »

hello, it's been several times that the cheksum clears the script. what is the problem?thank you
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #281 on: April 18, 2023, 10:48:28 AM »

What does "clears the script" mean?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
JeanAwt
Full Member
***

Karma: +8/-9
Offline Offline

Posts: 193


« Reply #282 on: April 18, 2023, 11:03:47 AM »

sorry I'm not specific, in fact I have the 2step script and sometimes the checksum signals me 2 errors. if I validate the checksum it erases the first 5 lines of the launch

the answer must be simple but I do not see it. each modification on my file with the launch the checksum removes these 5 lines. I do not understand
« Last Edit: April 18, 2023, 11:35:48 AM by JeanAwt » Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #283 on: April 18, 2023, 12:05:15 PM »

sorry I'm not specific, in fact I have the 2step script and sometimes the checksum signals me 2 errors. if I validate the checksum it erases the first 5 lines of the launch

the answer must be simple but I do not see it. each modification on my file with the launch the checksum removes these 5 lines. I do not understand

What checksum erases the lines???

I have written custom code , put it in the middle of bumfuck nowhere etc and me7sum works perfectly to this day.
Logged
JeanAwt
Full Member
***

Karma: +8/-9
Offline Offline

Posts: 193


« Reply #284 on: April 18, 2023, 12:31:57 PM »

sorry, I'm not expressing myself well. a friend put me the 2step script for the launch. it works well but me if I modify this file on any map the checksum ols 232 me7 on ols deletes me these 5 lines at the end of the file on the 9 lines it deletes 5. and I no longer launch it. I am a noob I have not yet read or studied how to put the script I guess until it is it's 9 last lines to add. If you don't want to answer I understand.
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
Pages: 1 ... 17 18 [19] 20 21
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)