Pages: 1 ... 17 18 [19]
Author Topic: LC/NLS  (Read 146809 times)
stuydub
Full Member
***

Karma: +20/-10
Offline Offline

Posts: 195


« Reply #270 on: October 24, 2021, 12:24:54 PM »

But the author of the post wrote that both functions can work in one file, at least that's what the google translator told me, sorry for my English

It does work with both in same file been tried and tested numerous times
Logged
beszesc
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #271 on: November 18, 2021, 10:45:58 AM »

Hello. I have problem with this ecu from BEX. I have few version of script launch control, but none works good with this flash. One time car don't start right away. Second time the car started, but after time ecu reports checkum error. Reflash help on short time and situation repeats itself. Anybody help me? Before I never have a problem with script. I try change NLS counter adress, but it is wrong way.
« Last Edit: November 18, 2021, 10:48:13 AM by beszesc » Logged
bamofo
Sr. Member
****

Karma: +34/-2
Offline Offline

Posts: 418


« Reply #272 on: November 18, 2021, 11:46:41 AM »

Hello. I have problem with this ecu from BEX. I have few version of script launch control, but none works good with this flash. One time car don't start right away. Second time the car started, but after time ecu reports checkum error. Reflash help on short time and situation repeats itself. Anybody help me? Before I never have a problem with script. I try change NLS counter adress, but it is wrong way.

Looks like you did not do the CSM./ If your file is right this file is checksum'd correct
Logged
beszesc
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #273 on: November 18, 2021, 01:09:38 PM »

I'm sorry, of course my bin which I posted have errors now, but when I flashed ecu I check checksum twice. Maybe I change something last time.

On this bin car don't start also when I made some kilometers, although checksums are correct in me7sum.





Logged
Sandstorm3k
Sr. Member
****

Karma: +10/-12
Offline Offline

Posts: 394



« Reply #274 on: January 18, 2022, 02:01:23 PM »

After patching the temp check out of the 1ML906032 file it worked flawlessly on a 50.000 mile BAM engine.

Until the almighty BAM went 'BAM'.

Upon further investigation it seems as if the valves and pistons are intact, but the head gasket let go. Cool piece of code, but definitely not worth the risk on a stock turbo/stock engine FWD. Save your stock engines & turbo('s)  Roll Eyes


Edit: blew the engine, bent rod. Did still run though with a hole in the engine.

« Last Edit: September 28, 2022, 03:38:53 PM by Sandstorm3k » Logged
Sn0w3y
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #275 on: September 27, 2022, 03:01:45 PM »

Hello guys,

today i tried to add LC and NLS to my Files Tongue

i successfully added LC and i thought NLS aswell - i did not use script BUT i orientated myself on the .pdf v3 Cheesy

can somebody just give me a hint so i can learn what i did wrong?

Logged
BlackT
Hero Member
*****

Karma: +71/-32
Offline Offline

Posts: 1261



« Reply #276 on: September 28, 2022, 05:14:35 AM »

Hello guys,

today i tried to add LC and NLS to my Files Tongue

i successfully added LC and i thought NLS aswell - i did not use script BUT i orientated myself on the .pdf v3 Cheesy

can somebody just give me a hint so i can learn what i did wrong?


You dont need NLS beacuse it work really bad, 200ms is to slow to gearbox, and after shifitng you will have masive retard and power loss
Logged
Sn0w3y
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #277 on: September 28, 2022, 08:58:34 AM »

You dont need NLS beacuse it work really bad, 200ms is to slow to gearbox, and after shifitng you will have masive retard and power loss

I want to have it so bad even if it works bad Cheesy

so i should set it higher? Which ammount of ms do you recommend?
Logged
Sandstorm3k
Sr. Member
****

Karma: +10/-12
Offline Offline

Posts: 394



« Reply #278 on: September 28, 2022, 03:37:46 PM »

I want to have it so bad even if it works bad Cheesy

so i should set it higher? Which ammount of ms do you recommend?
Pay someone
Logged
Sn0w3y
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #279 on: September 29, 2022, 01:36:04 AM »

Pay someone

Already solved - thanks !:)
Logged
Pages: 1 ... 17 18 [19]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)