Pages: [1]
Author Topic: nefmoto doesnt see vagcom cable, vcds is connecting fine tho  (Read 9546 times)
bjaroch
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5



So my tuner just sent me over my first .bin file to flash to the car but i cant get nefmoto to see the vagcom cable, ive done everything the nefmoto beginner guide said to do and vcds lite is working fine with the same cable, same ecu ect... im doing this on a 02 s4 in the car, not bench.
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #1 on: May 12, 2017, 12:10:11 PM »

So did you make sure the cable is in dumb mode?   So does nefmoto detect the cable?  So does it show in the listbox of cables to choose from?

Edit:

After re-reading (sorry I was fixated on how your sentence started with so) you are using VCDS lite, which only requires a serial device (com port) to connect.   Nef requires an FTDI based cable.  SO your cable probably won't work.  So you need a cable such as this:

http://www.ebay.com/itm/VAG-COM-USB-Cable-OBD-II-2-FTDI-KKL-409-1-VW-Audi-VCDS-Ross-Tech-BMW-/291675297967?hash=item43e933d8af:g:lX8AAOSweW5U3MaS
« Last Edit: May 12, 2017, 12:14:06 PM by SB_GLI » Logged
bjaroch
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #2 on: May 12, 2017, 12:53:30 PM »

It doesnt show in nefmoto at all. the drop down box is empty.
Dumb mode? I thought that was only for authentic rosstech cables not ebay vagcom
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #3 on: May 12, 2017, 01:00:08 PM »

It doesnt show in nefmoto at all. the drop down box is empty.
Dumb mode? I thought that was only for authentic rosstech cables not ebay vagcom

refer to my post above... you need an ftdi based cable, such as the one in the ebay link.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #4 on: May 12, 2017, 03:23:51 PM »

Nefmoto does not support CH340 cables.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
bjaroch
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #5 on: May 18, 2017, 01:29:42 PM »

I have the correct cable now, I went through the complete setup. it works on vcds lite, me7logger and it connected the first try with nefmoto flasher but got stuck before 1% even came up and then it wouldn't even connect every other try so for now I went back to my buddies rosstech cable to get the ecu flashed properly but I need to get my ebay ftdi cable working
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #6 on: May 18, 2017, 11:35:50 PM »

Post log from nefmoto software, that would be a good start to find the solution Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.028 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)