Pages: 1 [2] 3 4
Author Topic: Adjust speed scale on Audi B6 RB4 cluster  (Read 19306 times)
Bechersbou
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #15 on: July 31, 2020, 03:21:16 AM »

ok thanks i test it. and how can i check if it worked? gps speed and speedometer compare?
so i need the line from a RS4 B7 Dump
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #16 on: August 01, 2020, 05:30:52 AM »

Yes i think it the only way to check - or maybe you can simulate a can frame and send a speed signal.

Changing from mph to kmh is easy to check thru output test in vcds/vag-com

In my opinion a rs4 b7 0x320 line should like: bb 00 77 01 10 27 0C 7B 00 00 71 01 00 20 62 40  ( 0c 7b is value 315 kmh at the end or try 18 79 that is 310 kmh , in s4 a value 54 6f is 285 kmh )
Logged
Bechersbou
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #17 on: August 01, 2020, 08:13:04 AM »

ok i will test is when my KKL Cable arrived.
Maybe i can check the speed signal in RNS-E in Engineering Mode
Logged
Bechersbou
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #18 on: August 04, 2020, 06:43:21 AM »

My VAG Can Commander 5.5 arrived, but it dont work.
I found out that i have a RB8 Cluster.
Any Idea?
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #19 on: August 04, 2020, 06:47:22 AM »

vag commander wont work - rb4 clusters  can read with kkl cable and vag epprom programeer 1.19 , rb8 only with vag dash can , abrites/fvdi , carprog etc.

Of if you have a progamer you can read and write dump straight from epprom
Logged
Bechersbou
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #20 on: August 04, 2020, 07:47:34 AM »

Ok thanks.
Fu*** Sh*** Tongue

I ordered now VAG DASH CAN 5.29
Logged
Bechersbou
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #21 on: August 14, 2020, 02:22:02 AM »

@macxxx
My dash can arrived. Is there any thing I can make wrong in read/write? Don't want to brick my speedometer

Best regards
Nico
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #22 on: August 14, 2020, 05:09:56 AM »

If you dont mess up crypted part then you are safe , vag dash can saves a rescue file in case of problems
Logged
Bechersbou
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #23 on: August 14, 2020, 05:18:49 AM »

@macxxx I tried now to read eeprom but dash can says always ERROR 1422

Help please
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #24 on: August 14, 2020, 05:30:48 AM »

What option did you use?
Logged
Bechersbou
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #25 on: August 14, 2020, 05:35:18 AM »

@macxxx

Audi A4 05-07 RB8

I have a A4 B7 12.01.2008
Have you maybe whatsapp or something? It would be very nice if you can help me..
I tried other options but not working.
It reads out:

8E0920931S 0200 KOMBI+WFS 3 H10
WAUZZZ8E88A12***** AUX6Z0G0058938
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #26 on: August 14, 2020, 05:39:24 AM »

Never had any problem with reading these clusters - maybe once i had such erorr but can't remember what was the cause.

I understand that it connects ,  reads identification and then the erorr shows up?
You read in car or on bench?
Logged
Bechersbou
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #27 on: August 14, 2020, 05:41:01 AM »

@macxxx

hmm  Sad
i read in car...
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #28 on: August 14, 2020, 07:10:03 AM »

Do you reading crypted or encryped?
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #29 on: August 14, 2020, 11:35:19 AM »

There is no such option in vagdashcan and rb8 clusters
Logged
Pages: 1 [2] 3 4
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.031 seconds with 16 queries. (Pretty URLs adds 0s, 0q)