need help m3.8.3 immo

Pages: [1]

« previous next »

Author

Topic: need help m3.8.3 immo (Read 4130 times)

gareth_iowc

Full Member

Karma: +1/-1
Offline

Offline

Posts: 62

	need help m3.8.3 immo « on: May 16, 2017, 01:27:38 PM »

hi all,

so i successfully read the eeprom from my me7.5 immo and flashed a de-immob bin and it worked ok.

no i'm trying to do the same for my friend and having a little trouble.

ECU - 06a 906 018 R
Immo Chip - 24c02

i have my test clip attached but when i read it all i get is 0's!

The device family i have chosen is "24lc" and the cloest device "24lc02b"

is this right?

I'm still learning but getting there

any help would be great.

thanks gareth


	Logged

gareth_iowc

Full Member

Karma: +1/-1
Offline

Offline

Posts: 62

	Re: need help m3.8.3 immo « Reply #1 on: May 16, 2017, 01:44:32 PM »

here is a pic


	Logged

bennyboi

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 33

	Re: need help m3.8.3 immo « Reply #2 on: May 17, 2017, 12:03:14 AM »

remove the chip from the board as it can also try and power up the MCU when trying to read.


	Logged

gareth_iowc

Full Member

Karma: +1/-1
Offline

Offline

Posts: 62

	Re: need help m3.8.3 immo « Reply #3 on: May 17, 2017, 12:42:05 AM »

Mcu?

My soldering skills are not up to scratch. Getting that off seccsessfuly would be a challenge.

The test clip was ok with the me7.5


	Logged

prj

Hero Member

Karma: +1072/-486
Offline

Offline

Posts: 6045

	Re: need help m3.8.3 immo « Reply #4 on: May 17, 2017, 01:57:31 AM »

Not going to work on this board, you are trying to power the entire ECU through the testclip.
Desolder. BTDT.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

December 02, 2024, 10:52:59 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search