Pages: [1]
Author Topic: Bosch M3.8.3 Pin out description  (Read 5434 times)
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663



« on: May 25, 2017, 04:43:57 AM »

Hi, im doing an experiment here with my ECU and wonder if anyone here have an I/O (pinout description for M3.8.3 ecu)
Logged

E85oholic
grey
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 146


« Reply #1 on: May 25, 2017, 07:12:31 AM »

Does it work for you?

Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« Reply #2 on: May 25, 2017, 06:36:18 PM »

It is in french but nothing that a translator can solve   Grin Grin Grin
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663



« Reply #3 on: May 26, 2017, 09:28:41 AM »

Thanks this is awsome help....

Another question... If i lets say want to find which pin on the connector thay is "connected" to which input pin on the processor. Im just experimenting here
Logged

E85oholic
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.269 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)