Pages: [1]
Author Topic: immo off help  (Read 5438 times)
bl33su
Jr. Member
**

Karma: +0/-4
Offline Offline

Posts: 32


« on: June 01, 2017, 05:03:41 PM »

hi all,

can anyone help immo off my bin?
« Last Edit: June 01, 2017, 06:40:40 PM by bl33su » Logged
rogerius
Full Member
***

Karma: +61/-6
Offline Offline

Posts: 114


« Reply #1 on: June 01, 2017, 10:31:05 PM »

hi all,

can anyone help immo off my bin?

You have to read the EEPROM in order to perform immo off, not the flash.
Logged
bl33su
Jr. Member
**

Karma: +0/-4
Offline Offline

Posts: 32


« Reply #2 on: June 01, 2017, 10:54:23 PM »

ahhh right!

thanks for that..
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #3 on: June 02, 2017, 06:09:15 AM »

You have to read the EEPROM in order to perform immo off, not the flash.
Immo off in flash is possible
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #4 on: June 02, 2017, 11:17:00 AM »

Immo off in flash is possible

I've seen this mentioned at least 3 times on here by different people. Anyone going to shed some light on how it's done?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
prj
Hero Member
*****

Karma: +903/-420
Online Online

Posts: 5789


« Reply #5 on: June 02, 2017, 02:51:06 PM »

I already did. There is no magic "change this byte here" solution, you need to disassemble.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Colt45
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 36


« Reply #6 on: June 03, 2017, 06:24:13 PM »

I'd imagine you change the function that reads the eeprom bytes for immo to always take the immo off route, regardless of what is actually in the eeprom.

finding that in the disassembly is the hard part, though...
Logged
Mikhail
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 136


« Reply #7 on: June 03, 2017, 10:47:10 PM »

I'd imagine you change the function that reads the eeprom bytes for immo to always take the immo off route, regardless of what is actually in the eeprom.

finding that in the disassembly is the hard part, though...
Should be pretty straight forward to look what is the immo values addresses to eeprom, then find out what is eeprom starting address at the memory map and used DPP page. From these calculate the whole address by which can search the disassembly and find where it is used at the code.
Logged
bl33su
Jr. Member
**

Karma: +0/-4
Offline Offline

Posts: 32


« Reply #8 on: June 04, 2017, 02:16:00 AM »

Anyone able to give it a shot?

Just got a new cluster from wreckers and need a easy fix if possible
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #9 on: June 04, 2017, 08:06:46 AM »

read the eeprom from the orig and write to the new one
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0s, 0q)