Pages: [1]
Author Topic: Need photo of resitors near to the am400fb chip in me7.5  (Read 6225 times)
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498


« on: June 13, 2017, 03:20:02 AM »

Can anyone post configuration od resitors that arena soldered to the pcb near the AM400Fb chip. It's a me 7.5 4b0906018 Ecu. IT had a Oettinger chip - i have desoldered everything , soldered the am chip on pcb but there is no communication - oetinnger changed the resitors , i want to go back to OEM configuration.
Logged
Scheitan
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


« Reply #1 on: July 08, 2017, 04:47:43 PM »

Make a pic and mark which resistors you mean. Than i will look on my spare ecus.
Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498


« Reply #2 on: July 10, 2017, 11:14:31 PM »

Ok thanks for response , I will  upload a pic later
Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498


« Reply #3 on: July 11, 2017, 12:12:21 PM »

Photo of it , the white remain is some silicone on which the oetinnger adapter sat on

Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498


« Reply #4 on: August 25, 2017, 03:50:49 AM »

Anyone?
Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #5 on: August 25, 2017, 04:26:29 AM »

That beacuse you solder pin21 for boot on ground tru 289 ressistor. That cirtuit must be open
this is 800BB
Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601


« Reply #6 on: August 25, 2017, 04:59:41 AM »

Just use google and "me7 boot pin"



Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498


« Reply #7 on: August 25, 2017, 05:11:35 AM »

Thanks, I will try leaving 2 od them - I feel stupid now Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)