Pages: [1]
Author Topic: Please schematic for Audi 1.8T AEB and AWT swap  (Read 5459 times)
pompak
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 15


« on: July 31, 2017, 10:46:53 AM »

Hello.

I have an Audi A4 B5 with 1.8T engine AEB 5 cubes ME 3.2 1996r and go to swap on ME 7.5, I already have everything coil, flowmeter, lambde, dampers, knock sensors, pedal rack, electronic pedal. But unfortunately I do not have electrical schematics computer is on 5 dice 8d0 907 557 and new from 1.8T AWT 4b0 907 018 r and i need help . The biggest problem is that the cubes are in the bottom, originally there are 4 cubes and not many connections in the newer 5 cubes (known in addition to the gas pedal). Does anyone have diagrams for these 2 drivers?
Logged
MadCow
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 108


« Reply #1 on: July 31, 2017, 05:42:09 PM »

I have this: https://www.dropbox.com/s/d4p6xbkfubi5xc1/Wiring.zip?dl=0

I started with a 1999 AHA (v6) but the wiring at the 4/5 main connectors is pretty much the same. This will get you 80% of the way there.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)