diwasas
Newbie
Karma: +0/-0
 Offline
Posts: 15
|
 |
« on: August 27, 2017, 06:14:47 AM »
|
|
|
Hi, I tried to read a PIN code from RB4 cluster (8E0920900L) with "vag eeprom programmer 1.9", as program requires I set cluster mode to "new mode" and after that when I tried to read decrypted eeprom I'm getting an error " Not an audi a4 RB4 encrypted". Now I cannot set cluster to adapted mode, because I'm always getting same error. But it allows to read encrypted eeprom. Anybody have any advice what could be a problem of this? I successfuly read several RB4 cluster before and did not have any problems... Is it possible to extract pin code from encrypted eeprom? I'm attaching what I was able to read, but it seems that it does not have any info...  |
|
|
|
« Last Edit: August 27, 2017, 06:17:34 AM by diwasas »
|
Logged
|
|
|
|
|
aef
|
|
« Reply #1 on: August 27, 2017, 08:57:25 AM »
|
|
|
Your file is garbage. As far as i know, only way to fix crypto dash is via obd in the actial car with the right tool.
Do you have SAFE message in the dash?
Where are you from?
|
|
|
|
|
Logged
|
|
|
|
jolidj
Full Member
Karma: +0/-3
Offline
Posts: 54
|
|
« Reply #2 on: August 27, 2017, 09:07:07 AM »
|
|
|
open dash and read 24c08 . whay you need to read pin about dash?? dant have ecu?
|
|
|
|
|
Logged
|
|
|
|
diwasas
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #3 on: August 27, 2017, 10:13:37 AM »
|
|
|
I've tried to read from ECU at first but it is MED711 (a4 2.0 fsi, 2003y) vag commander was unable to read this ecu. At this moment only ecu lights is working, main screen and mileage shows no info.
|
|
|
|
|
Logged
|
|
|
|
jolidj
Full Member
Karma: +0/-3
Offline
Posts: 54
|
|
« Reply #4 on: August 27, 2017, 11:15:19 AM »
|
|
|
ok. car start?? dash is dead?? need to open it , read good eeprom bye desoldering. post file , we see if can repair. if not need to finde other file from same dash nr , write back and adapt dash on car. read eeprom from ecu , open it , desolder eeprom and read bye programer save file and post. other solution if dont have tool to adapt is to try immo off.
|
|
|
|
|
Logged
|
|
|
|
diwasas
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #5 on: August 27, 2017, 01:27:09 PM »
|
|
|
ok. car start?? dash is dead?? need to open it , read good eeprom bye desoldering. post file , we see if can repair. if not need to finde other file from same dash nr , write back and adapt dash on car. read eeprom from ecu , open it , desolder eeprom and read bye programer save file and post. other solution if dont have tool to adapt is to try immo off.
Car do not start because of immo. On the cluster works only warning lights, trip computer and mileage are off. I've found an eeprom in the internet from the same cluster. But do not know the pin code. Anybody can confirm if it is a not corrupted dump? Not sure if "vag eeprom programmer" will be able to write back this dump. |
|
|
|
« Last Edit: August 27, 2017, 01:30:30 PM by diwasas »
|
Logged
|
|
|
|
|
aef
|
|
« Reply #6 on: August 27, 2017, 01:30:32 PM »
|
|
|
All of this will not work with a crypted dash.
You need expensive Tools.
Read everything you will find for rb4 in here or other Forums.
|
|
|
|
|
Logged
|
|
|
|
jolidj
Full Member
Karma: +0/-3
Offline
Posts: 54
|
|
« Reply #7 on: August 27, 2017, 01:51:13 PM »
|
|
|
i try to find login on last dash file. 27739 17600km . ore if swaped byte 23404 17600km .
you need to open dash , read your file , write this file and see if all ok , after find login on ecu and adapt. ore if dash is ok , do immo off on ecu.
|
|
|
|
|
Logged
|
|
|
|
EuroXs4
Full Member
Karma: +15/-31
Offline
Posts: 209
|
|
« Reply #8 on: February 13, 2018, 03:34:27 PM »
|
|
|
What year cluster early clusters were not rb4 early b6 cars had Japanese clusters installed only early 2002 cars.
Sent from my iPhone using Tapatalk
|
|
|
|
|
Logged
|
|
|
|
|
macxxx
|
|
« Reply #9 on: February 14, 2018, 02:01:16 AM »
|
|
|
Model year 2001 b6 clusters are not crypted , and i found two clusters from model year 2002 beeing not crypted too ( propably begging of my2002 )
|
|
|
|
|
Logged
|
|
|
|
Oski
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #10 on: March 13, 2018, 01:49:32 PM »
|
|
|
All of this will not work with a crypted dash.
You need expensive Tools.
VAGEepromProgrammer works with either crypted or noncrypted RB4s. The problem is a lack of knowledge how to use it, so it often comes back with DEF. Anyways, cluster mentioned above is one of the noncrypted and can be easily fixed via obd or with a programmer. |
|
|
|
|
Logged
|
|
|
|
Kacza
Full Member
Karma: +20/-7
Offline
Posts: 216
|
|
« Reply #11 on: March 13, 2018, 03:13:34 PM »
|
|
|
How to fix def and error in the crypto cluster?
|
|
|
|
|
Logged
|
|
|
|
|
aef
|
|
« Reply #12 on: March 13, 2018, 03:31:29 PM »
|
|
|
proper tools
|
|
|
|
|
Logged
|
|
|
|
Oski
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #13 on: March 15, 2018, 03:22:43 PM »
|
|
|
How to fix def and error in the crypto cluster?
Send cluster to me for instance  |
|
|
|
|
Logged
|
|
|
|
|
