Pages: 1 2 3 [4] 5 6
Author Topic: Reversing an ME7.1.1 St10F27X Audi TT 3.2  (Read 49637 times)
Gonzo
Sr. Member
****

Karma: +20/-30
Offline Offline

Posts: 483


« Reply #45 on: November 13, 2017, 09:48:14 PM »

Another option is triggering BBSAWE on shift

MED9 has an option to dump fuel on shift. One just needs to recreate that. I get nice pops with negative timing and BBSAWE with MED9
Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 442


« Reply #46 on: November 14, 2017, 04:26:29 AM »

Another option is triggering BBSAWE on shift

MED9 has an option to dump fuel on shift. One just needs to recreate that. I get nice pops with negative timing and BBSAWE with MED9

cwsawe
ENSAKHG
TVSAG
and KFTVSA are enough for that but still Ignition cut will function better on the short period of time that the dsg requires to shift gears.
« Last Edit: November 14, 2017, 04:29:22 AM by gt-innovation » Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 442


« Reply #47 on: November 18, 2017, 05:52:46 AM »

I actually remember trying B_gsch and no dice

Well it works fine as i had another error on my check routine when i was testing that so B_gsch is the way to go in a DSG car.
The duration is enough for the ignition cut..
« Last Edit: November 18, 2017, 06:50:13 AM by gt-innovation » Logged
Gonzo
Sr. Member
****

Karma: +20/-30
Offline Offline

Posts: 483


« Reply #48 on: November 18, 2017, 07:35:00 AM »

Well it works fine as i had another error on my check routine when i was testing that so B_gsch is the way to go in a DSG car.
The duration is enough for the ignition cut..
Good to know. It didn't work when I tried this on a MK4 1.8T but who knows.
Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 442


« Reply #49 on: November 25, 2017, 04:25:57 AM »

Some final tips since my LC and NLS works perfect with ignition Retardation on Dsg and Manual.

Use 160ms of Delay for the retard on NLS(for dsg)
B_gsch is Perfect for activating NLS
-48 Degrees will do the trick for both lc and nls

Blue flame on Gearshifts with catalyst and stock exhaust system.



Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 442


« Reply #50 on: February 01, 2018, 12:03:52 PM »

So i found some time to do a decent video in the code i am running right now..

https://www.youtube.com/watch?v=DUcXId0OJKo
Logged
Kacza
Full Member
***

Karma: +20/-6
Offline Offline

Posts: 213


« Reply #51 on: March 12, 2018, 05:00:25 AM »


Can anyone perform LC and ALS on the Audi A3 8P 3.2?
How much is it?
Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 442


« Reply #52 on: March 13, 2018, 08:56:13 AM »

Can anyone perform LC and ALS on the Audi A3 8P 3.2?
How much is it?

Yes for the right price....
Logged
Kacza
Full Member
***

Karma: +20/-6
Offline Offline

Posts: 213


« Reply #53 on: March 13, 2018, 10:13:41 AM »


Is it enough to read OBD?
Logged
prj
Hero Member
*****

Karma: +903/-420
Online Online

Posts: 5787


« Reply #54 on: March 13, 2018, 03:04:58 PM »

Best to read processor too...

Else you can't really correct checksum.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Kacza
Full Member
***

Karma: +20/-6
Offline Offline

Posts: 213


« Reply #55 on: March 13, 2018, 03:12:00 PM »

That is Boot Mode?
Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 442


« Reply #56 on: March 14, 2018, 03:16:49 AM »

That is Boot Mode?

Yes it is boot mode. Ktag will do that fine in your ecu.
Logged
rysiektr
Jr. Member
**

Karma: +3/-3
Offline Offline

Posts: 45


« Reply #57 on: June 26, 2019, 06:30:52 AM »

Hello maybe you can help me, it is possible in that ECU to activate analogue RPM output on PIN 37?
Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 442


« Reply #58 on: June 26, 2019, 09:11:36 AM »

Nefmoto = DIY

use an arduino and get signal from wiring harness and convert it to analogue..
Logged
rysiektr
Jr. Member
**

Karma: +3/-3
Offline Offline

Posts: 45


« Reply #59 on: June 27, 2019, 07:37:28 AM »

Nefmoto = DIY

use an arduino and get signal from wiring harness and convert it to analogue..

It is impossible to activate that output?
Logged
Pages: 1 2 3 [4] 5 6
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.038 seconds with 17 queries. (Pretty URLs adds 0s, 0q)