Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Cluster and Immobilizer
(Moderator:
ddillenger
) >
EDC17C46 Immo off problem safe and start and stop
Pages: [
1
]
« previous
next »
Author
Topic: EDC17C46 Immo off problem safe and start and stop (Read 4816 times)
romano21
Jr. Member
Karma: +0/-5
Offline
Posts: 29
EDC17C46 Immo off problem safe and start and stop
« on: September 06, 2017, 04:41:57 AM »
Hello ALL
I have replace a dead Ecu on an Audi A4 2.0Tdi 143
EDC17C46 2.7
SW: 03L906018AC
HW: 03L906018JL
TC1767
it was replaced by the same version HW and SW
I Make immo off in the flash manualy and in the eeprom Checksum ok. Car start but it does not work properly I have the SAFE light on the dashboard and the start function and stop dysfunction. i try many immo off in eproom but not work ! always Safe on dash
I have just tested the method of Weboctopus same result for more information here is the error code I have
in the 05 ACC / START
02241 - Motor control module; vehicle immobilizer not adapated
in 01 Engine P1609 Crash shutdown on
(I Think This one come from the base in the ecu donor)
the car starts and rolls very well. but Safe to Dash
You can help?
Logged
mkxGTi
Full Member
Karma: +4/-5
Offline
Posts: 69
Re: EDC17C46 Immo off problem safe and start and stop
« Reply #1 on: November 07, 2017, 05:24:42 PM »
post original flash|eeprom .bins. i'd like the immo off bins aswell. everybody claims they can do it themselves.
Logged
H2Deetoo
Sr. Member
Karma: +26/-1
Offline
Posts: 256
Re: EDC17C46 Immo off problem safe and start and stop
« Reply #2 on: January 18, 2018, 02:02:19 AM »
Best solution is to transfer immo from original to donor ecu.
If that isn't possible then immo off in ecu is OK but better do it in eeprom and not in flash.
And to remove the warning/error in cluster then you also need to disable the immo in the cluster.
Logged
superglitch
Jr. Member
Karma: +4/-0
Offline
Posts: 45
Re: EDC17C46 Immo off problem safe and start and stop
« Reply #3 on: January 18, 2018, 08:47:16 AM »
There’s no good working solution for this. Best option is to drive it to dealer, flash to stock and then have them do immo alignment (key adapt is what most call it), if they have issues because vin is different, unplug the ecu until it says to replace the broken ecu.
Logged
bennyboi
Jr. Member
Karma: +2/-0
Offline
Posts: 33
Re: EDC17C46 Immo off problem safe and start and stop
« Reply #4 on: January 25, 2018, 09:13:32 AM »
post flash and eep!
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
April 20, 2024, 02:35:07 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...