NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > me7.5 bricked??
Pages: [1]
« previous next »
Author Topic: me7.5 bricked??  (Read 4455 times)
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48
« on: September 12, 2017, 09:52:29 AM »
hi guys,
i was working on a seat cordoba cupra 1.8t and while writing it, it crashed 2 times!(about 70%)
its about a 6k0906032aa / 0261207071 / 29f400bb

i had no connection so first i bought another ecu and plugged it in with a stock file an it was running so i tried to write the file again en it crashed again..
then i tried the bootmode(the right way) in the car and on the bench but no luck. then i got a 10k resistor and still didnt get any communication.
i only have a kess right now at home and dont have anymore tools or ideas.

the odd thing is that the file came from an ibiza and this was already running in a other car. and the first ecu had a running file also from an ibiza but this was a stage1 and the new file is a stage2.

i dont have the tools to de-solder it and progam it again and the only thing i have is a vcds cable and the kess(complete with bootloader). so i have now 2 ecu to try more ideas.

hope you guys can help me with this!
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178
« Reply #1 on: September 12, 2017, 10:17:25 AM »
Why don't you make your own stage 2?
Logged
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48
« Reply #2 on: September 12, 2017, 02:57:55 PM »
not learned enough to try that and dont wont things to get broken just liked the other 2  Grin
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1568
« Reply #3 on: September 13, 2017, 05:12:13 AM »
have u tried writing with nefmoto?
have you tried reading the eeprom to check is bootmode works in general?
have you tried the with your cables serial in galletto exe?

I have seen kess once and its a pain with all the popups, turn ignition on, turn it off, turn it on.... you will never know when its time to turn on for the bootmode  Cheesy
Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283
« Reply #4 on: September 13, 2017, 05:38:16 AM »
Quote from: murfieus on September 12, 2017, 09:52:29 AM
hi guys,
i was working on a seat cordoba cupra 1.8t and while writing it, it crashed 2 times!(about 70%)
its about a 6k0906032aa / 0261207071 / 29f400bb

i had no connection so first i bought another ecu and plugged it in with a stock file an it was running so i tried to write the file again en it crashed again..
then i tried the bootmode(the right way) in the car and on the bench but no luck. then i got a 10k resistor and still didnt get any communication.
i only have a kess right now at home and dont have anymore tools or ideas.

the odd thing is that the file came from an ibiza and this was already running in a other car. and the first ecu had a running file also from an ibiza but this was a stage1 and the new file is a stage2.

i dont have the tools to de-solder it and progam it again and the only thing i have is a vcds cable and the kess(complete with bootloader). so i have now 2 ecu to try more ideas.

hope you guys can help me with this!

100% original 29f400BB flash ? because many time change flash 400BT this flash not possible many tool write 100%, 70-98% dropped connection
Logged
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48
« Reply #5 on: September 13, 2017, 01:17:19 PM »
I think its the flash was a BT because it stops at 80% 2 times. Im going to try with the nefmoto and cable tomorrow. And your right about the kess because it doesnt show anything. I read it with vcds and it says this-is-the-ram-progam.
Logged
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48
« Reply #6 on: September 17, 2017, 01:13:08 PM »
i solved it!
just made a bench with the 121 pin and in bootmode , i used the kess with obd2 plug and it write the ori file and stage 2 file.
Logged
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48
« Reply #7 on: September 17, 2017, 01:16:14 PM »
but now the next problem is that i cant connect nefmoto with my rosstech cable. it say something about the ftdi chip. i installed the driver and try al methods i know but still not working. bootmode doesnt work either.

any more ideas??
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 24, 2024, 11:15:47 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)