NefMoto > Technical > Flashing and Chipping > 1999 audi A4 1.8T and its AM29F200 flash questions
Pages: [1]
« previous next »
Author Topic: 1999 audi A4 1.8T and its AM29F200 flash questions  (Read 6916 times)
vwnut8392
Sr. Member
****

Karma: +19/-7
Offline Offline

Posts: 271
« on: December 29, 2011, 02:11:31 PM »
ive been toying with an A4 that has an AM29F200BB chip and i cannot get it to read via OBD. i have a galetto 1260 clone cuz honestly i have never had any luck with the nefmoto software with any cable i own, not talking trash just not a very lucky guy. anyhow am i going to have to unsolider the chip in this one or any mod that can be done to the ECU to allow flashing via OBD?
Logged
pvl
Sr. Member
****

Karma: +32/-1
Offline Offline

Posts: 350
« Reply #1 on: December 30, 2011, 12:58:13 AM »
search this forum for bootmode. Works perfectly with galletto. You only have to take the ecu out,
and temp. bridge 1 pin inside for 3 secs when appyling power to the ecu. Works fine over here.
Soldering is not needed.

Kwp2000+ interface could also be used, and might work via obd also.

Best interface to get, is the mpps interface. Thats works great via obd. It also supports bootmode.

Cheers,

PvL
Logged
vwnut8392
Sr. Member
****

Karma: +19/-7
Offline Offline

Posts: 271
« Reply #2 on: December 30, 2011, 03:08:18 AM »
Quote from: pvl on December 30, 2011, 12:58:13 AM
search this forum for bootmode. Works perfectly with galletto. You only have to take the ecu out,
and temp. bridge 1 pin inside for 3 secs when appyling power to the ecu. Works fine over here.
Soldering is not needed.

Kwp2000+ interface could also be used, and might work via obd also.

Best interface to get, is the mpps interface. Thats works great via obd. It also supports bootmode.

Cheers,

PvL

thanks for the input PVL, your so full of useful information. i looked into the MPPS V5 and its functionality looks to be the same as the galetto 1260, can you explain any difference?
Logged
pvl
Sr. Member
****

Karma: +32/-1
Offline Offline

Posts: 350
« Reply #3 on: January 01, 2012, 10:45:15 PM »
Galletto works ONLY in bootmode with M7.x.x ecu's. And is Rocksolid.

Mpps ALSO has bootmode-options, like galletto, but actually WORKS via OBD.

If it fails, get yourselfe a benchflash harness, and do it on the workbench. 99,9%
success guarranteerd ! I did difficult cars with MPPS. Worked a treat.

GET the thang....  v12 is the most stable one, but V3 or v5 will do.

Cheers,

PvL
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #4 on: January 03, 2012, 05:29:01 AM »
Correct me if I'm wrong, but I thought 99 A4 was pre ME7? Isn't it ME5.9.2 or earlier? If so, I don't think read over OBDII is possible. I'm unsure of bootmode for it though. I have a 99.5, and I looked into this a while ago, but back then there's a really good chance I skipped over something.
Logged
This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
pvl
Sr. Member
****

Karma: +32/-1
Offline Offline

Posts: 350
« Reply #5 on: January 03, 2012, 06:46:31 AM »
Read with vagcom,  channel 1. And show us the ecu numbers.
This tells way more than alot of blablabla...

Cheers,

PvL
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 08:34:26 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 16 queries. (Pretty URLs adds 0s, 0q)