O2 sensor

Pages: [1]

« previous next »

Author

Topic: O2 sensor (Read 4963 times)

GatisGirdenis

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 27

	O2 sensor « on: October 09, 2017, 02:57:10 PM »

Hello,
I've got a fairly quick question.
As far as I've read on the forums and seen it mentioned, like, everywhere, the ME7.1 is a narrowband ecu, on 1.8t that is.
I swapped my car to a 24V VR6 and it has a ME7.1G ECM, which is paired with a single 6 wire O2 sensor and the post cat one, which would make me think it's a wideband?
I might want to go MAFless some day, so I was thinking if I'll need to swap the ecu to ME7.5?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Online

Online

Posts: 12270

	Re: O2 sensor « Reply #1 on: October 09, 2017, 03:34:54 PM »

Quote from: GatisGirdenis on October 09, 2017, 02:57:10 PM

I might want to go MAFless some day

why?


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

GatisGirdenis

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 27

	Re: O2 sensor « Reply #2 on: October 09, 2017, 03:51:18 PM »

Quote from: nyet on October 09, 2017, 03:34:54 PM

why?

Might want to try and figure out how to do an ITB setup on a stock ECU. It would make more sense going with a standalone, I know, I know, but living in a not so wealthy country is the reason I might not want to shed a grand on an ECU, if it's avoidable somehow


	Logged

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 630

	Re: O2 sensor « Reply #3 on: October 10, 2017, 12:30:57 AM »

You could do ITB and still have MAF, just put a airbox on it


	Logged

GatisGirdenis

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 27

	Re: O2 sensor « Reply #4 on: October 10, 2017, 05:18:18 AM »

Quote from: KasperH on October 10, 2017, 12:30:57 AM

You could do ITB and still have MAF, just put a airbox on it

I guess, but the clearance on a MK4 24v already is tight, so building an efficient airbox could be quite a struggle.
I'm also one of the guys who 'doesnt like the look of a MAF', so if it is indeed a wideband, which I think it is, just need a confirmation, I dont see a problem going MAFless.


	Logged

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 630

	Re: O2 sensor « Reply #5 on: October 10, 2017, 12:27:19 PM »

By your description, yes I believe it is a wideband. (6 wire pre cat probe and a post cat probe)
But not 100% sure since its a VR6


	Logged

GatisGirdenis

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 27

	Re: O2 sensor « Reply #6 on: October 10, 2017, 09:28:44 PM »

Quote from: KasperH on October 10, 2017, 12:27:19 PM

By your description, yes I believe it is a wideband. (6 wire pre cat probe and a post cat probe)
But not 100% sure since its a VR6

Is there any way I can check? Like, measure some blocks in vagcom or something similar?


	Logged

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 630

	Re: O2 sensor « Reply #7 on: October 10, 2017, 11:02:54 PM »

What is the software number of the ECU?


	Logged

Carsinc

Sr. Member

Karma: +17/-2
Offline

Offline

Posts: 447

	Re: O2 sensor « Reply #8 on: October 12, 2017, 08:05:53 AM »

Yes its probably wideband, but thats not the point, its also DBW...


	Logged

GatisGirdenis

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 27

	Re: O2 sensor « Reply #9 on: October 13, 2017, 06:04:40 AM »

Quote from: KasperH on October 10, 2017, 11:02:54 PM

What is the software number of the ECU?

I guess this is the software number? 362915? It's a version 0005.

Quote from: Carsinc on October 12, 2017, 08:05:53 AM

Yes its probably wideband, but thats not the point, its also DBW...

I'm almost certain that I could sacrifice a throttle body and make a DBW ITB setup. It would slightly reduce the throttle response, but I'm after the volumetric efficiency of the ITBs which can go even above 100% at a set range. Also, as far as I know, the idle control is done by the ECM with the throttle plate, so that would make it slightly easier to set up the ITBs, if I COULD get it to work.
Looked up DBW ITBs and looks like Honda people have done it quite a bit


« Last Edit: October 13, 2017, 06:15:17 AM by GatisGirdenis »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 12:46:31 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search