Pages: [1]
Author Topic: P0601 error and not starting  (Read 5813 times)
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« on: October 15, 2017, 06:34:14 AM »

Hi guys , i have some problems with a leon 1.8t me7.5 032NH file 1024kb. After a long ride the engine light wont light up and doesnt start. When i write it again the car wil run but after a long distace ride it comes back. When i read dtc with vcds it says p0601 checksum error. I have checked it with me7check , me7sum , me7corrector , mpps checksum but it give 0 errors.
I was researching about the deathcode but i dont have a kkl cable yet. (Already order it) but i dont want to hack the bin or delete dtc’s.

Can someone look at the file for me pleaseee or give me advice !

(Im on my gsm now and post the files and logs later, sorry for that!)
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632


« Reply #1 on: October 15, 2017, 07:06:14 AM »

Did you add LC/NLS with the script?
Logged
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« Reply #2 on: October 15, 2017, 12:15:01 PM »

Yes it was already scriptes with lc and nls and it worked in a other car with the same numbers but only in this car it gives errors
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: October 15, 2017, 01:17:38 PM »

Yes it was already scriptes with lc and nls and it worked in a other car with the same numbers but only in this car it gives errors

As stated time and time again, the public NLS/LC code is buggy and causes problems with RSA checking. Please do not use it. Instead, use it as a guide to write your own.
« Last Edit: October 15, 2017, 03:11:54 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #4 on: October 15, 2017, 01:54:27 PM »

if you flash back to your stock file and not the modded file the DTC should go away.
Logged
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« Reply #5 on: October 15, 2017, 02:05:48 PM »

no your right, i use the older file now without lc nls and dont have any problems yet , but really wanted the lc and nls working and dont have enough knowledge to do it my self  Cheesy
Logged
316LV
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 150


« Reply #6 on: October 15, 2017, 03:15:25 PM »

no your right, i use the older file now without lc nls and dont have any problems yet , but really wanted the lc and nls working and dont have enough knowledge to do it my self  Cheesy

Nyet explains it here:

http://nefariousmotorsports.com/forum/index.php?topic=6308.msg69447#msg69447

You need to find a better location. As he suggests, use ME7Logger to log a potential location first...
Logged

Go ahead and give me negative karma... I don't care if you like what I post princess.
gt-innovation
Sr. Member
****

Karma: +60/-89
Online Online

Posts: 442


« Reply #7 on: October 16, 2017, 06:28:27 AM »

Different location does not work either or even if you put another unused memory address for the counter.

Either downgrade your sw version or fix the problem in the code.
Logged
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« Reply #8 on: October 16, 2017, 09:31:52 AM »

I didnt make the file by myself and dont know how to change location , so i first must to learn how to make files so i know what to do. So i will read the topic and check the sw to
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)