Pages: [1]
Author Topic: cheksum  (Read 2939 times)
kotzimix
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: October 25, 2017, 12:19:53 PM »

hi.my car is grande punto tjet.my ecu is remap for programmer.i want a reset to factory settings with ori file.now my problem.....I use galleto 4 and when start write the ori file say <<CHEKSUM NOT SUPROTED..CONTINUE?>> what can I?
i make a stage 1 from ori file and when start write say <CHEKSUM NOT SUPROTED..CONTINUE>>.not checksum
Logged
woj
Hero Member
*****

Karma: +41/-3
Offline Offline

Posts: 500


« Reply #1 on: October 25, 2017, 01:15:56 PM »

Kind of obvious, isn't it? Fix the checksum, do not attempt to flash without it, you will brick the ECU. Or use different flasher, MPPS I think supports checksum for this ECU.
Logged
kotzimix
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #2 on: October 25, 2017, 02:09:31 PM »

the galleto is writing 10 times to ecu.but now this file and all ori files no checksum.byte DFFFF write .CFFFF  not write.
who mpps i use?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)