Pages: 1 [2]
Author Topic: B5 s4 base maps ?  (Read 9632 times)
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #15 on: November 11, 2017, 12:44:13 PM »

well, this has been fun
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632


« Reply #16 on: November 11, 2017, 12:56:34 PM »

Worth the wait.
Logged
S4B52000
Newbie
*

Karma: +0/-9
Offline Offline

Posts: 11


« Reply #17 on: November 11, 2017, 11:33:04 PM »

Well , i started with a map from euro b5s4 , mbox then i followed s4 tuning wiki , took me 4 hours to make sure was at my liking , egt delete , rear o2 delete , anti lag , 2 step , scaled maf , and re-coded cluster ,turned up boost , checked  afr's ,turned up vmax.. perty much everything was adjusted ... went to start the car , no start then i went to re-check if i did every thing correctly and did ... then re tried to read ecu id with mpps , no ecu found, tried to hard re-set ecu no dice , soo i went alot and pulled ecu to look if i had ANY melted solder , burt connectors or anything everything was perfect on the back of the board , when i flipped it over i realised there was a neuspeed p-chip 64.02.28..
. It's then that i realised that it messed up the EE prom ... on that note , should i get proper EE prom chip and re-solder specific location and try again with map i did ? P.s howmuch do theses chip go for ? Never checked and of what i know theses are super rare ... what a rollercoaster ride and a PITA i got for my fist tune ahahaha
cool, let us know how it goes!
« Last Edit: November 11, 2017, 11:47:12 PM by S4B52000 » Logged

S4B52000
Newbie
*

Karma: +0/-9
Offline Offline

Posts: 11


« Reply #18 on: November 11, 2017, 11:37:41 PM »

Readup...well , guess car is parked until i get the proper ee prom chip , cant read, write ,id ecu , its not found lol Grin
Worth the wait.
Logged

nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #19 on: November 12, 2017, 02:40:17 AM »

b5s4 ecu should function just fine with a corrupted eeprom chip unless you have immo. i think something else is wrong. did you checksum your file properly? did you try stock?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
S4B52000
Newbie
*

Karma: +0/-9
Offline Offline

Posts: 11


« Reply #20 on: November 12, 2017, 08:59:08 AM »

Yes i did checksum and corrected it , i just cannot connect to ecu anymore, im going over to the shop to re try it today thanks for replying nyet
b5s4 ecu should function just fine with a corrupted eeprom chip unless you have immo. i think something else is wrong. did you checksum your file properly? did you try stock?
« Last Edit: November 12, 2017, 09:01:46 AM by S4B52000 » Logged

emtdiaz
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20


« Reply #21 on: November 14, 2017, 08:21:05 AM »

I have a stock a box way for sale if you want to buy it? Email me at Ritchierjdiaz@gmail.com
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)