Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Flashing and Chipping
>
A4 B6 1.8T ecu chip
Pages: [
1
]
« previous
next »
Author
Topic: A4 B6 1.8T ecu chip (Read 3943 times)
vilsson
Newbie
Karma: +0/-0
Offline
Posts: 2
A4 B6 1.8T ecu chip
« on: November 10, 2017, 12:17:16 AM »
Hi, opened my Audi A4 B6 1.8t ecu to flash it in boot mode. But noticed that its already modified (soldered chip). Any idea what chip this might be? Do I get this in boot mode same way by grounding pin 24?
Logged
nyet
Administrator
Hero Member
Karma: +604/-166
Online
Posts: 12233
Re: A4 B6 1.8T ecu chip
« Reply #1 on: November 10, 2017, 12:21:30 AM »
No. Remove the riser, solder on a blank flash, bootmode flash to stock.
Logged
ME7.1 tuning guide
(READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
KasperH
Hero Member
Karma: +24/-8
Offline
Posts: 632
Re: A4 B6 1.8T ecu chip
« Reply #2 on: November 10, 2017, 06:45:31 AM »
Or if your SMD soldering skills isn't that great,
you could buy a spare ecu and tune on that instead.
Logged
_nameless
Hero Member
Karma: +322/-449
Offline
Posts: 2688
Re: A4 B6 1.8T ecu chip
« Reply #3 on: November 10, 2017, 07:03:42 AM »
hot air
easy
Logged
If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out
https://instatune.sellfy.store/
TijnCU
Hero Member
Karma: +60/-4
Offline
Posts: 690
flying brick
Re: A4 B6 1.8T ecu chip
« Reply #4 on: November 10, 2017, 07:05:50 AM »
On an ABT ecu I had I could just put it into bootmode by grounding the extra pad that is linked to pin24. Dont know if I would be able to flash over it, didnt try, but I think so. It read just fine. (if you are curious, it was not good...)
Logged
My project (all photos back online!)
vilsson
Newbie
Karma: +0/-0
Offline
Posts: 2
Re: A4 B6 1.8T ecu chip
« Reply #5 on: November 10, 2017, 08:34:46 AM »
Thanks. I have a spare ecu that is already tuned so I can use that if something goes wrong. I think that chip is MTM. Tune with bigger injectors.
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
April 25, 2024, 10:17:01 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...