Pages: [1]
Author Topic: ME7.1.1 speed signal error  (Read 2747 times)
SaldoS4
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« on: November 13, 2017, 02:39:19 AM »

I put ME7.1.1 ECU from Allroad 2.7T to A6 that was originally have ME7.1
Now i have P0501 - speed sensor signal error.
Is there any way to take a signal not from the dashboard via CAN, but may be from ABS?
How to do it?
Logged
SaldoS4
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #1 on: November 13, 2017, 02:53:09 AM »

today i want to use CWGGVFZG
But if this not help the question still will be relevant
Logged
corradovolksb
Full Member
***

Karma: +18/-1
Offline Offline

Posts: 112



« Reply #2 on: November 13, 2017, 10:20:10 AM »

I think you will need to switch the speed signal wire to a different pin location when switching from 7.1 to 7.1.1 but I can't remember what pins to switch.
Logged

2000 Nogaro blue S4 Stage 2. VAG for life.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.479 seconds with 16 queries. (Pretty URLs adds 0s, 0q)