Pages: [1]
Author Topic: 95040 In-Circuit Programming / Reading  (Read 2618 times)
Hembo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: November 24, 2017, 12:22:30 PM »

Hey Guys!

Is it a good idea to in-circuit program / read the 95040 on an ME7.5 ? The OBD / Bootmode tool does not work on my ECU (posted already in the programmer thread).

Thank you :-)  Smiley
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #1 on: November 24, 2017, 01:02:14 PM »

Hey Guys!

Is it a good idea to in-circuit program / read the 95040 on an ME7.5 ? The OBD / Bootmode tool does not work on my ECU (posted already in the programmer thread).

Thank you :-)  Smiley

That method is very hit or miss. Desolder, or get a different tool. There's at least one posted on here that will work.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)