Cluster Diesel to Gasoline Conversion

Pages: [1]

« previous next »

Author

Topic: Cluster Diesel to Gasoline Conversion (Read 3614 times)

vara82

Full Member

Karma: +2/-0
Offline

Offline

Posts: 64

	Cluster Diesel to Gasoline Conversion « on: December 04, 2017, 08:25:51 AM »

Hey Guys...
I´ve a little problem...

My Car is a 2000 Audi A3 1.8t where my Cluster was damaged...

I bought a new one... It´s the same cluster but from Diesel Engine...
Both Clusters are VDO (old 8L0920931F, new 8L0920932D)

I change the coding over OBD to Gasoline Turbo Engine and swapped my Gasoline Scales to the Diesel Cluster.
But rpm shows still too much (seems it match to the Diesel Scales)

Everything else works fine, Immo adapted successfully,...

How can i change to Gasoline Engine to show the correct RPM?!

Dump from the Diesel Cluster attached!!

Best regards,
Flo


	Logged

H2Deetoo

Sr. Member

Karma: +26/-1
Offline

Offline

Posts: 256

	Re: Cluster Diesel to Gasoline Conversion « Reply #1 on: December 05, 2017, 12:13:01 AM »

Copy the RPM scale from one eeprom to the other.
Problem is locating the RPM scale in eeprom ... trial and error I guess.


	Logged

vara82

Full Member

Karma: +2/-0
Offline

Offline

Posts: 64

	Re: Cluster Diesel to Gasoline Conversion « Reply #2 on: December 05, 2017, 10:50:24 AM »

Thanks for your Reply...

I found a little Prog called "Dash Dump Edit"...

With this program it´s easy to copy RPM and Speedo Data from one bin to another...

Works very fine!


	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: Cluster Diesel to Gasoline Conversion « Reply #3 on: December 06, 2017, 10:32:31 AM »

Serch for Hex CC 00 or similar , next 8 bytes are the rpm map


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 26, 2024, 05:53:59 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search