Pages: 1 [2]
Author Topic: Hi!!! help magnetic marrelli 95040 dump immo off  (Read 343 times)
chiptuner123
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21



« Reply #15 on: December 06, 2017, 05:29:52 AM »

EMULATOR FRIEND!!!!!!!!!!!!!!!!!!!!!
Logged
psirop@me.com
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 13


« Reply #16 on: December 06, 2017, 09:56:47 AM »

Thanks for all reply
Logged
psirop@me.com
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 13


« Reply #17 on: December 06, 2017, 09:59:50 AM »

BUt I dont think only emulator can do that.  And what about getting the skc code for the bin file. Not pin code but 7 digit skc code so that I can code the ecu.
Logged
focalpoint519
Full Member
***

Karma: +25/-49
Online Online

Posts: 137



« Reply #18 on: December 06, 2017, 02:37:10 PM »

post the file you where sent, maybe users here can help i it seems to be a 90540 eprom im not sure about what your saying, but what method are you using to write the file?
Logged
Marty
Hero Member
*****

Karma: +65/-52
Offline Offline

Posts: 813


« Reply #19 on: December 07, 2017, 08:09:56 AM »

post the file you where sent, maybe users here can help i it seems to be a 90540 eprom im not sure about what your saying, but what method are you using to write the file?
the ecu the op is working on is a magnetic marrelli ecu not a bosch ecu. not all vag eeproms are the same specially when they are not from the same manufacture. About 5 seconds on google would have solved this whole thread. OP as stated before by others the only way to bipass the immo is to spoof it with a $10 emulator from ebay heres the link too https://www.ebay.com/itm/VAG-IMMO-Emulator-For-VW-Audi-100-A6-A4-A8-Golf-IV/272923344916?hash=item3f8b7fc014:g:IwcAAOSwyYFaF8Xj
Logged

psirop@me.com
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 13


« Reply #20 on: December 07, 2017, 11:25:32 AM »

hi!!! It's all made by humain...Hope that someone develop an immo off for magnetic marrelli ! because , emulator are good , by unavailable in some countries !! Like mine Mauritius island ,and very long to wait !!but thanks for all for reply !!
The solution was to code the key to the cluster , immo light flash , by car start !
Logged
focalpoint519
Full Member
***

Karma: +25/-49
Online Online

Posts: 137



« Reply #21 on: December 07, 2017, 02:18:06 PM »

See if this tool will read your cluster, im not sure it will but if it does, there must be a immo off trick in the cluster, if it reads post the file, there is a lot of immo experts on http://www.digital-kaos.co.uk/, i suggest you try there maybe, but good to hear you got it sorted with key pairing

VAGeeprom Programer (cluster tool)
https://ufile.io/f18bz

« Last Edit: December 07, 2017, 02:20:39 PM by focalpoint519 » Logged
chiptuner123
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21



« Reply #22 on: December 09, 2017, 09:36:08 AM »

only emulator. I use this many times.we are company and we work with chip tune files
Logged
psirop@me.com
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 13


« Reply #23 on: December 09, 2017, 07:20:42 PM »

Thanks for reply.  What type of tune can you do.  Got an 2.0 tfsi audi engine with Awx engine.  Can you remap it for me. Loll
Logged
chiptuner123
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21



« Reply #24 on: December 10, 2017, 02:54:07 AM »

yes but not for free☺
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0s, 0q)