Pages: [1]
Author Topic: TT MK1 3.2 VVT trigger map  (Read 3656 times)
tonytony232
Jr. Member
**

Karma: +0/-4
Offline Offline

Posts: 26


« on: December 08, 2017, 03:35:04 AM »

Hey guys! After I install aftermarket cams, I have problem with vvt system...
So, problem is in that vvt does work only when engine temperature reachs 85-90 celsius, before that I have DTC g28 to g163.
After, that engine temperature reachs 85-90 celsius DTC-s gone and engine running with full performance... Roll Eyes

So, maybe there is a some vvt trigger map, that i can modify to make work vvt earlier?
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #1 on: December 08, 2017, 03:58:54 PM »

the rings on the ends of the cams, are you positive they are correct?
Logged
tonytony232
Jr. Member
**

Karma: +0/-4
Offline Offline

Posts: 26


« Reply #2 on: December 09, 2017, 06:13:35 AM »

the rings on the ends of the cams, are you positive they are correct?

99% correct, I have checked timing for that 2 days ago
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #3 on: December 09, 2017, 01:36:03 PM »

not the timing, there are 3 almost piston ring like seals on the end of the cams, they get trash/ broken alot
Logged
tonytony232
Jr. Member
**

Karma: +0/-4
Offline Offline

Posts: 26


« Reply #4 on: December 10, 2017, 07:59:53 AM »

not the timing, there are 3 almost piston ring like seals on the end of the cams, they get trash/ broken alot

do u have a p/n for the cam rings?
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #5 on: December 10, 2017, 08:37:51 AM »

066 109 345A
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)