Pages: [1] 2
Author Topic: Good old M2.3.2 for the masses  (Read 8331 times)
prj
Hero Member
*****

Karma: +309/-41
Offline Offline

Posts: 3656


« on: December 14, 2017, 10:39:10 AM »

Some of you may know that the old Audi I5 ECU is my darling - I started what I am doing today with it...
Because there is no longer any commercial viability to it, I release all my developments and knowledge. Everything is at http://m232.org.

List of some of the stuff I have done:
* Custom datalogging routines in ECU and C++ DLL driver for windows for the WinLog suite
* Complete rewrite of load acquisition in the ECU to go from mass-flow to SD. Incl ECU hardware mods. Maf Delete.
* Complete rewrite of transient enrichment algorithms.
* 16 bit load support, no more 255 cap.
* Launch control, antilag, flatshift, knock disable
* Map switching
* TunerPro checksum plugin
* TunerPro xdf definition
* TunerPro adx definition for live tracing

Everything is open, free for all and fully documented.
There won't be a lot of people who care about this on here, but here is to those who do Smiley
Logged
KasperH
Hero Member
*****

Karma: +18/-7
Offline Offline

Posts: 624


« Reply #1 on: December 14, 2017, 10:53:03 AM »

Thanks for sharing man  Cheesy
My brother in law has a S6 C4 so this might make for some fun Smiley
Logged
woj
Sr. Member
****

Karma: +28/-1
Offline Offline

Posts: 429


« Reply #2 on: December 14, 2017, 11:38:34 AM »

Everything is open, free for all and fully documented.
There won't be a lot of people who care about this on here, but here is to those who do Smiley

Not interested in this particular ECU, nevertheless, might want to look into this to compare notes, as I also have my darling ECU(s), so many thanks.

A question that I have to ask - do you have a ball park on man-hours you spent on this?
Logged
gin+
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 38


« Reply #3 on: December 14, 2017, 12:20:29 PM »

Aweome Cheesy
Logged
Carsinc
Sr. Member
****

Karma: +15/-2
Offline Offline

Posts: 448


« Reply #4 on: December 14, 2017, 12:36:39 PM »

its gonna be alot harder for me to say bad things about you up here now... Grin
Logged
vwaudiguy
Hero Member
*****

Karma: +48/-35
Offline Offline

Posts: 1990



« Reply #5 on: December 14, 2017, 12:37:53 PM »

Thanks for sharing, D. Hope I get the chance one day to do something with this ecu. Also, I could not find the prjmod binaries referenced in the wiki. Are these available?
« Last Edit: December 14, 2017, 12:53:45 PM by vwaudiguy » Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
prj
Hero Member
*****

Karma: +309/-41
Offline Offline

Posts: 3656


« Reply #6 on: December 14, 2017, 01:16:46 PM »

Thanks for sharing, D. Hope I get the chance one day to do something with this ecu. Also, I could not find the prjmod binaries referenced in the wiki. Are these available?
Read toolchain setup info, there is github repo.
Not interested in this particular ECU, nevertheless, might want to look into this to compare notes, as I also have my darling ECU(s), so many thanks.

A question that I have to ask - do you have a ball park on man-hours you spent on this?
I don't. Way too much, probably over a thousand hours.
Logged
vwaudiguy
Hero Member
*****

Karma: +48/-35
Offline Offline

Posts: 1990



« Reply #7 on: December 14, 2017, 01:19:01 PM »

Read toolchain setup info, there is github repo.I don't. Way too much, probably over a thousand hours.


Found it. Thank you!
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
alizczewy
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 23


« Reply #8 on: December 14, 2017, 02:12:55 PM »

Some of you may know that the old Audi I5 ECU is my darling - I started what I am doing today with it...
Because there is no longer any commercial viability to it, I release all my developments and knowledge. Everything is at http://m232.org.

List of some of the stuff I have done:
* Custom datalogging routines in ECU and C++ DLL driver for windows for the WinLog suite
* Complete rewrite of load acquisition in the ECU to go from mass-flow to SD. Incl ECU hardware mods. Maf Delete.
* Complete rewrite of transient enrichment algorithms.
* 16 bit load support, no more 255 cap.
* Launch control, antilag, flatshift, knock disable
* Map switching
* TunerPro checksum plugin
* TunerPro xdf definition
* TunerPro adx definition for live tracing

Everything is open, free for all and fully documented.
There won't be a lot of people who care about this on here, but here is to those who do Smiley

Thanks a lot prj, i dream to build an Audi 5cyl engine and tune it on stock engine management. Your contribution is pretty much worthy for me. Kind of regards


Sent from my iPhone using Tapatalk
Logged
mister t
Sr. Member
****

Karma: +63/-18
Offline Offline

Posts: 344


« Reply #9 on: December 14, 2017, 03:14:52 PM »

PRJ, many thanks for this information.

As it stands, it's way over my head, but laying it out in a wiki like you've done makes it possible to digest.

Looking forward to learning what I can from your contributions Smiley
Logged
grifrowl
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 56



« Reply #10 on: December 15, 2017, 10:17:30 PM »

Awesome.
Logged
prj
Hero Member
*****

Karma: +309/-41
Offline Offline

Posts: 3656


« Reply #11 on: December 18, 2017, 02:09:56 AM »

I added source code (C++) for the WinLog and TunerPro plugins to the github repo.
Logged
gt-innovation
Sr. Member
****

Karma: +45/-32
Offline Offline

Posts: 389


« Reply #12 on: December 18, 2017, 03:42:20 AM »

Epic...
Logged
focalpoint519
Full Member
***

Karma: +26/-61
Offline Offline

Posts: 148



« Reply #13 on: January 04, 2018, 12:25:03 PM »

Stud Status  Shocked
Logged
grifrowl
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 56



« Reply #14 on: January 04, 2018, 08:56:07 PM »

I added source code (C++) for the WinLog and TunerPro plugins to the github repo.

Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.031 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)