NefMoto > Technical > Tuning > Disable cat in 3B0907551DB
Pages: [1]
« previous next »
Author Topic: Disable cat in 3B0907551DB  (Read 6151 times)
Hollywood
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 60
« on: December 14, 2017, 02:27:10 PM »
Anyone know where CDKAT is in the 3B0907551DB - 04 Passat ATQ.

I've tried 00'ing every spot in the range where it should be. Nothing. Do I have to disable something more to disable cat? Stumped.

I'd upload it, but i'm getting an error of upload folder full.
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 630
« Reply #1 on: December 14, 2017, 11:23:16 PM »
Did you use ESKONF?
Logged
Hollywood
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 60
« Reply #2 on: December 15, 2017, 01:20:19 AM »
If it's anything like 2.7 files, disabling the rear o2 in ESKONF will totally remove the readiness monitor... get flagged during smog inspection.
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 630
« Reply #3 on: December 15, 2017, 01:22:35 AM »
If you removed the cats, you wouldn't pass smog anyway.
So readiness would be less of a concern or am I wrong?
Logged
Hollywood
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 60
« Reply #4 on: December 15, 2017, 01:25:44 AM »
Car has cats, they're just worn out. Only thing I'm trying to do is pass smog. Using spacers on the o2's causes post-cat lambda faults.
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 630
« Reply #5 on: December 15, 2017, 01:50:37 AM »
Quote from: Hollywood on December 15, 2017, 01:25:44 AM
Car has cats, they're just worn out. Only thing I'm trying to do is pass smog. Using spacers on the o2's causes post-cat lambda faults.

Ahh, okay Smiley
What have you changed and to what?
Logged
Hollywood
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 60
« Reply #6 on: December 15, 2017, 03:21:42 AM »
I've used the prj's maplocator to find(and zero)
CDKAT - 181A0
CDLSH - 181A8
CDLSHV - 181A9
CDHSH - 1819C
CWKONLS - 181B9 to 17

I've also tried to zero about 10 places in either direction of where CDKAT should be...and still shows can monitor not-ready.
Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498
« Reply #7 on: December 15, 2017, 04:00:11 AM »
Try to compare with known definition od 2.7t and search manually
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802
« Reply #8 on: December 15, 2017, 05:18:36 AM »
Quote from: macxxx on December 15, 2017, 04:00:11 AM
Try to compare with known definition od 2.7t and search manually

This is what i did a few weeks ago for a for a 2.8 passat i needed to tune. I found everything i needed by using the m box file to find maps. PROKON are in the sameish location but the bits dont line up exactly it will take a bit of playing around to find what youre looking for. I fpumd eskonf with searching  the me7.1 eskonf bits. I even got 2 strp patched and working (non public patch) <iframe width="560" height="315" src="https://www.youtube.com/embed/HU16bdbbB-Q" frameborder="0" gesture="media" allow="encrypted-media" allowfullscreen></iframe>
« Last Edit: December 15, 2017, 05:30:20 AM by Marty » Logged
Giving your mom a tuneup
Hollywood
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 60
« Reply #9 on: December 15, 2017, 06:53:16 AM »
So, I found the ESKNOF in 4 spots. Changed them all accordingly, assuming that rear 02 bit is the same as m-box 2.7t. Still no dice.

00 FC E0 FC 0C 30 F0 FF EA FF 55 55 55
00 FC E0 FC 0C 30 C0 FF EA FF 55 55 55
00 FC E3 FC 0C 30 F3 FF EA FF 55 55 55
00 FC E3 FC 0C 30 C3 FF EA FF 55 55 55

To

00 FC E0 FC 0C 30 FC FF EA FF 55 55 55
00 FC E0 FC 0C 30 CC FF EA FF 55 55 55
00 FC E3 FC 0C 30 FF FF EA FF 55 55 55
00 FC E3 FC 0C 30 CF FF EA FF 55 55 55
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #10 on: December 15, 2017, 01:18:12 PM »
Since when is ESKONF needed to bypass cats?
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 630
« Reply #11 on: December 15, 2017, 01:56:17 PM »
Quote from: vwaudiguy on December 15, 2017, 01:18:12 PM
Since when is ESKONF needed to bypass cats?

Coding out rear O2's. (Apparently this wasn't the goal)
Removing cat diagnosis, but also disrupting readiness in the process.


My approach would be to find cat diagnosis threshold maps
and manipulate them to accept the deteriorated state of the cats.
Haven't done anything like this before, so this is where my experience ends Smiley

But i might look into it, for the sake of a challenge  Tongue
« Last Edit: December 15, 2017, 02:09:00 PM by KasperH » Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 630
« Reply #12 on: December 15, 2017, 02:42:33 PM »
AHKATMN, AHKATMX & AHKTMXT?

Try decreasing AHKATMN and increasing AHKATMX & AHKTMXT.
it should loosen up the tolerances for defective cat diagnosis.
By how much I can't answer you Smiley

Note that this should be with all cat monitoring systems active.
« Last Edit: December 15, 2017, 03:21:34 PM by KasperH » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 29, 2024, 10:52:39 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 16 queries. (Pretty URLs adds 0s, 0q)