Deki
Newbie
Karma: +0/-0
 Offline
Posts: 2
|
 |
« on: December 15, 2017, 03:52:02 AM »
|
|
|
Hi, my car is A3 1.8T AGU with K03s setup(FMIC,downpipe,TIP...) and 347cc injectors.
I have a "stage 2" map from some chiptuning company, they say it is should have a 1,4 peak boost and drop to 1.
But my boost peaks at 1 bar and drops to approx 0,6 bar
Did some logs, maf is maxed out at 187 g/s, load is about 10ms actual and requested.
N75 dc is 75 % max.
AFR was from 14,5 to 11,3 at WOT.
I was advised to put MBC by tuner, but it doesnt make much sense to me.
My question is do I have a wrong file, and what load request should be for 1,4 bar peak?
If I set MBC to 1,4 will the AFR be lean?
|
|
|
|
« Last Edit: December 15, 2017, 04:17:39 AM by Deki »
|
Logged
|
|
