NefMoto > Technical > Tuning > Disable OBD read protection in flash
Pages: 1 [2]
« previous next »
Author Topic: Disable OBD read protection in flash  (Read 11384 times)
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260
« Reply #15 on: December 18, 2017, 08:17:20 AM »
SGO or other ori file does not matter. Please read a little bit more about MED9.1. It´s all in this and other boards. You can use any other file with same number just copy 6C00-6CFF, you didnt recognize that while your tests? Which range is you tool flashing via OBD? Maybe not full flash?
Logged
superglitch
Jr. Member
**

Karma: +4/-0
Offline Offline

Posts: 45
« Reply #16 on: December 18, 2017, 10:58:30 AM »
Obviously you're not working with an original file.

For the 1K0907115L_0030 file you're talking about the read protection is located at 0xA59A0  Stock value will be [00 01 11 70] this comes from the read seed/key algorithm is key = seed + 0x11170, read protect will change that to anything else.
Logged
jastr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 57
« Reply #17 on: December 18, 2017, 01:15:46 PM »
Quote from: cherry on December 18, 2017, 08:17:20 AM
SGO or other ori file does not matter. Please read a little bit more about MED9.1. It´s all in this and other boards. You can use any other file with same number just copy 6C00-6CFF, you didnt recognize that while your tests? Which range is you tool flashing via OBD? Maybe not full flash?

But another file will make the map i have for this sw ver not fit the ecu anymore right? So if i update the ecu now the program i just wrote by bdm doesn’t necessarily fit the new se version?

But you are right that solution would have been perfect from the start!

Immo data is no problem those I know how to change in the Ecu.

I’ve been reading quiet a few posts about med9.1 but unlike the ME7.1.1 there is not total write up so all the data is hidden in threads with other subject. So any reference is appreciated!
Logged
jastr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 57
« Reply #18 on: December 18, 2017, 01:17:41 PM »
Quote from: superglitch on December 18, 2017, 10:58:30 AM
Obviously you're not working with an original file.

For the 1K0907115L_0030 file you're talking about the read protection is located at 0xA59A0  Stock value will be [00 01 11 70] this comes from the read seed/key algorithm is key = seed + 0x11170, read protect will change that to anything else.

I would say you are probably right! I working with an Ecu purchased from German Ebay so most likely it is not standard or have been altered somehow.

However it doesn’t make my problem not exist. I think Lars was the helpful person that fixed the issue I just need testing now. So let’s see how this file works out.
Logged
Pages: 1 [2]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 12:31:03 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)