Pages: [1]
Author Topic: MED9 - idle ignition timing  (Read 1961 times)
drbluetongue
Jr. Member
**

Karma: +4/-1
Offline Offline

Posts: 41


« on: January 09, 2021, 09:40:19 PM »

Hi there

On my Golf 1.6 FSI, at idle my timing hops around between -7 and +7 degrees and can be really lumpy. It would do this even on the stock software - yet, when it would go into stratified mode on idle @ 20 degrees timing it would be buttery smooth.

I'd prefer my timing advance to be a lot higher - if I change the KFMRES map to give less torque reserve at idle to achieve this, do I need to raise or lower this value in KFMRES?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)