Pages: [1]
Author Topic: 4D0 907 551 AH B5 A4 2.8L Damos Needed  (Read 2944 times)
focalpoint519
Full Member
***

Karma: +29/-63
Offline Offline

Posts: 148



« on: December 31, 2017, 05:58:47 PM »

Looking for any definition file for 4D0 907 551 AH
Ecu is ME 5.92 i was told ecu read was not possible via Kline, but i could use this orig and flash MOD with MPPS and power to some extra pin 43 to enable writing?
« Last Edit: December 31, 2017, 06:00:51 PM by focalpoint519 » Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« Reply #1 on: January 02, 2018, 07:57:34 PM »

Looking for any definition file for 4D0 907 551 AH
I think that can be done using some others that are around here, as a model.

Ecu is ME 5.92 i was told ecu read was not possible via Kline
That is not 100% true.

But i could use this orig and flash MOD with MPPS and power to some extra pin 43 to enable writing?
If ECU uses a 29F200 as flash eeprom,  that method should work.

Logged
focalpoint519
Full Member
***

Karma: +29/-63
Offline Offline

Posts: 148



« Reply #2 on: January 02, 2018, 10:06:45 PM »

Thanks alot, from what i gather the 5.92 is interchangeable/cross-flashable with some ME 3.8 bins (this is what i assume is available) any suggestion to what lines up? i dont have a version preference, if theres a more supported bin i would prefer to use this before shelling out 80-100 euro for a damos (a member on this forum offered me this damos for 150 Euro) but would prefer to post this just so someone else can see the solution as well as save myself the probably unneeded cost
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)