Confused with 1.8t vacuum lines.

Pages: [1]

« previous next »

Author

Topic: Confused with 1.8t vacuum lines. (Read 5824 times)

ibizaCUPRA18t

Full Member

Karma: +2/-28
Offline

Offline

Posts: 153

	Confused with 1.8t vacuum lines. « on: January 05, 2018, 06:54:43 AM »

I am really confused with this. Its an AGU with dbw conversion.
The n75 is on the TIP and I dont know if its correctly connected. Also I have no idea where these two 4mm metal pipes go. They come from n249 and hang towards facing the front. What should they be connected to? I have no idea what to do. Here are some pics.


	Logged

jogtx16v

Full Member

Karma: +6/-1
Offline

Offline

Posts: 139

	Re: Confused with 1.8t vacuum lines. « Reply #1 on: January 05, 2018, 07:17:20 AM »

Hello, from what I see, DV vacuum is wrong.

The Diverter valve vacuum should go to 4mm metal pipe and to n249.

and for the hose you have in hand, I think it goes to vacuum reservoir.

check n75 too....

pics are from aww awp but probably very similar, but not 100% same to agu.

good luck !


« Last Edit: January 05, 2018, 08:17:38 PM by jogtx16v »	Logged

ibizaCUPRA18t

Full Member

Karma: +2/-28
Offline

Offline

Posts: 153

	Re: Confused with 1.8t vacuum lines. « Reply #2 on: January 05, 2018, 10:09:46 AM »

Quote from: jogtx16v on January 05, 2018, 07:17:20 AM

Hello, from what I see, DV vacuum is wrong.

The Diverter valve vacuum should go to 4mm metal pipe and to n249.

and for the hose you have in hand, I think it goes in rubber inlet pipe or in it plug at the side of valve cover.

check n75 too....

pics are from aww awp but probably very similar, but not 100% same to agu.

good luck !

What would I have to do if I wanted to get rid of n249? Connect the line straight to inlet manifold instead? Someone wrote that the dv hose goes to waste gate. I'm now confused for real.


	Logged

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 632

	Re: Confused with 1.8t vacuum lines. « Reply #3 on: January 05, 2018, 01:36:34 PM »

DV hose normally goes to N249.
And if you delete N249, DV should be connected to manifold.
And on your picture, the end connected from N75->DV should go N75->wastegate
The other connection should be N75->turbo outlet.


« Last Edit: January 06, 2018, 04:52:54 AM by KasperH »	Logged

ibizaCUPRA18t

Full Member

Karma: +2/-28
Offline

Offline

Posts: 153

	Re: Confused with 1.8t vacuum lines. « Reply #4 on: January 06, 2018, 03:27:33 AM »

Quote from: KasperH on January 05, 2018, 01:36:34 PM

DV hose normally goes to N249.
And if you delete N249, DV should be connected to manifold.
And on your picture, the end connected from N75->DV should go N75->turbo outlet.
The other connection should be N75->wastegate.

So the small hose should connect n75 to the intercooler pipe? Alright then. Thanks Kasper.


	Logged

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 632

	Re: Confused with 1.8t vacuum lines. « Reply #5 on: January 06, 2018, 04:51:45 AM »

Sorry I got it backwards. (Post edited)

As the picture posted before shows;
Long leg->TIP
Medium leg->Wastegate
Short leg->Turbo outlet

And when I say turbo outlet, I mean as close to the outlet of the turbo as possible.
Or in compressor housing outlet itself depending on setup.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 26, 2024, 05:24:16 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search