Problem Overrun in 8N0906018BH

Pages: [1] 2

« previous next »

Author

Topic: Problem Overrun in 8N0906018BH (Read 12489 times)

10fanta

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Problem Overrun in 8N0906018BH « on: January 22, 2018, 07:56:45 AM »

Hello i have poblem with overrun in BAM engine. In AUM i do like this:
KFNWEGM set to max rpm
KFTVSA decrease a litlle bit some value
KFTVSAKAT set 1 for row with a 900c grad
KFZWMN set to -19 from 4500 rpm to max on bigger load

Work pefect in aum in BAM a try everythink, CWSAWE set to 1 etc doesnt work. Whats its problem ?


	Logged

Pasteurised

Full Member

Karma: +1/-3
Offline

Offline

Posts: 90

	Re: Problem Overrun in 8N0906018BH « Reply #1 on: January 22, 2018, 10:10:56 AM »

Can you upload both bin files, or screenshots of the mentioned tables.


	Logged

10fanta

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Problem Overrun in 8N0906018BH « Reply #2 on: January 23, 2018, 04:46:02 AM »

Quote from: Lotka Volterra on January 22, 2018, 10:10:56 AM

Can you upload both bin files, or screenshots of the mentioned tables.

From this BAM, doesnt work...


	Logged

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 632

	Re: Problem Overrun in 8N0906018BH « Reply #3 on: January 23, 2018, 07:39:36 AM »

At what load did you set KFZWMN to -19?


	Logged

10fanta

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Problem Overrun in 8N0906018BH « Reply #4 on: January 23, 2018, 08:09:24 AM »

Set At the highest load, in AUM work perfect...


« Last Edit: January 23, 2018, 08:16:12 AM by 10fanta »	Logged

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 632

	Re: Problem Overrun in 8N0906018BH « Reply #5 on: January 23, 2018, 08:28:10 AM »

Firstly. Negative timing should be set at low to medium-low load, if at all needed.

Secondly. That doesn't look like KFZWMN, and why aren't your axis defined?
How do you know where and what you are changing?

And as a little sidenote; why did you set KFNWEGM to max RPM?


	Logged

brs

Full Member

Karma: +3/-11
Offline

Offline

Posts: 61

	Re: Problem Overrun in 8N0906018BH « Reply #6 on: January 23, 2018, 08:44:45 AM »

why did you increase KFZWMN on medium-low load ?


	Logged

adam-

Hero Member

Karma: +122/-33
Offline

Offline

Posts: 2178

	Re: Problem Overrun in 8N0906018BH « Reply #7 on: January 23, 2018, 08:48:06 AM »

What is load when you lift?

Clue: it's not 240.


	Logged

sonique

Sr. Member

Karma: +24/-12
Offline

Offline

Posts: 283

	Re: Problem Overrun in 8N0906018BH « Reply #8 on: January 23, 2018, 09:26:21 AM »

this it not good Wink


	Logged

10fanta

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Problem Overrun in 8N0906018BH « Reply #9 on: January 23, 2018, 12:57:17 PM »

Quote from: KasperH on January 23, 2018, 08:28:10 AM

1. http://nefariousmotorsports.com/forum/index.php?topic=7174.105 - KFNWEGM someone say set to max bla bla bla...
2. Axis ? doesnt care... its not a problem.

From aum and works pefect only when above 4500... but this solution doesnt work in BAM...


	Logged

grey

Full Member

Karma: +4/-1
Offline

Offline

Posts: 146

	Re: Problem Overrun in 8N0906018BH « Reply #10 on: January 23, 2018, 01:21:59 PM »

Quote from: 10fanta on January 23, 2018, 12:57:17 PM

there is a world of difference between two files..
AUM file is ok but BAM file very bad


	Logged

10fanta

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Problem Overrun in 8N0906018BH « Reply #11 on: January 23, 2018, 01:31:47 PM »

Quote from: grey on January 23, 2018, 01:21:59 PM

there is a world of difference between two files..
AUM file is ok but BAM file very bad

Yep there is a good answer bro thanks

So let's start...
KFNWEGM - aum go to hifg rpm work / BAM ?
KFTVSA decrease a litlle bit some value, BAM ? Whats its problem ? To long time or what ?
KFTVSAKAT set 1 for row with a 900c grad / BAM ?
KFZWMN set to -19 from 4500 rpm to max on bigger load - this its intrested you say to put -value in lowest load ? I wouldn't have this staff on lowest rpm ! Only when ride above 4500/ BAM file where is the problem ?

CWSAWE in AUM doesnt touch / in BAM ? :O


« Last Edit: January 23, 2018, 01:56:24 PM by 10fanta »	Logged

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 632

	Re: Problem Overrun in 8N0906018BH « Reply #12 on: January 23, 2018, 01:43:15 PM »

Quote from: 10fanta on January 23, 2018, 12:57:17 PM

1. KFNWEGM is resume engine speed map, And not really needed for overrun.
This is also mentioned somewhere in that thread.

2. But it seems like you are having problems?


	Logged

sonique

Sr. Member

Karma: +24/-12
Offline

Offline

Posts: 283

	Re: Problem Overrun in 8N0906018BH « Reply #13 on: January 23, 2018, 02:34:24 PM »

Quote from: 10fanta on January 23, 2018, 12:57:17 PM

yes because see the different


	Logged

10fanta

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Problem Overrun in 8N0906018BH « Reply #14 on: January 23, 2018, 02:57:23 PM »

Quote from: sonique on January 23, 2018, 02:34:24 PM

yes because see the different

And you thinking it is problem ?

KFZWMN on my file from BAM is adres 1756C right ? I change axis etc set this and try.

Other thinks ?

KFNWEGM - ?
KFTVSA - ?
KFTVSAKAT - dont touch ?
KFZWMN -I now
CWSAWE - 01


	Logged

Pages: [1] 2

« previous next »

Jump to:

Navigation

Personal Tools

April 23, 2024, 03:49:59 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search