Pages: [1]
Author Topic: Need to Checksum ME7.9.10 Abarth  (Read 447 times)
stepee
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« on: January 22, 2018, 06:27:40 PM »

Hi,

Currently i am working on a customer's Abarth with a ME7.9.10 how can i make the checksum?  I have tried the tool from forum but no success... get an error about file size :/

Hope to get some help, already tried the ECM also without success.

Thanks
Logged
gman86
Sr. Member
****

Karma: +22/-50
Offline Offline

Posts: 491


« Reply #1 on: January 22, 2018, 08:33:02 PM »

The ME7 checksum tool is only for the VAG ME7 range of ECUs.
Logged
stepee
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #2 on: January 23, 2018, 03:26:10 AM »

Yes, unfortunately... Also if there is any way to do it manually i can learn also from it.
Logged
Beaviz
Full Member
***

Karma: +5/-3
Offline Offline

Posts: 171


« Reply #3 on: January 23, 2018, 04:01:36 AM »

What tool do you use for flashing? Does it not support checksum correction?
Logged
stepee
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #4 on: January 23, 2018, 05:00:11 AM »

I use FG tech from boot not OBD
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)