Pages: [1]
Author Topic: 5120 / SD  (Read 9107 times)
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« on: March 28, 2018, 12:54:59 PM »

For sale:
Tested 5120 / SD files:
1.8T B5 - 8N0906018J
1.8T B6 - 8E0909518AL
2.7TT B5 - 8D0907551K
3.2 VR6 Mk4 - 022906032CN

And pretty much any other ME7 file for these modifications, but then it's minimum a day lead time to make it.
Prices start at 500 EUR depending on options chosen.

If you are turboing NA ME7, I have made a custom boost controller that can be integrated into the standard ECU outputting to the intake manifold changeover valve output (which can drive a N75).
Can work with MAF (ME3.8.3 style) or MAP signal without torque control issues.

Map switching based on rear o2 signal or pedals and adjustable launch control via pedals is also an option (incl. knock disable and antilag).
« Last Edit: March 28, 2018, 02:00:01 PM by prj » Logged

PM's will not be answered, so don't even try.
Log your car properly.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #1 on: March 28, 2018, 01:04:43 PM »

Does the k file come with a full k map pack and me7 .ecu file for scaled pressure vars? Definitely interested.

Also, an opinions on the publicly available 551M? I'd be curious to know if you think we missed anything

http://nefariousmotorsports.com/forum/index.php?topic=3027.msg29815#msg29815

Would be personally willing to pay consultation fee if that is what is needed.

TIA
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #2 on: March 28, 2018, 01:59:16 PM »

I don't have hex/a2l for 551K, but I have a very extensive xdf that I use myself to tune.
.ecu and log template of course included with scaled vars for any 5120 files.

551M I have not looked per se, but all the publicly available stuff had some bugs I think.
Right now I tune 2-3 cars a month on the 5120 551K file and they all work fine.

I really don't see the point of using 551M to be honest. But if you want to pay me to make a 5120 or SD patch for it, I'll do it.
« Last Edit: March 28, 2018, 02:00:59 PM by prj » Logged

PM's will not be answered, so don't even try.
Log your car properly.
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348


« Reply #3 on: March 29, 2018, 03:09:06 AM »

http://nefariousmotorsports.com/forum/index.php?topic=3027.495
Also, an opinions on the publicly available 551M? I'd be curious to know if you think we missed

same but for the K file I created, I'm using it on my s4 and on 2 rs4 of friends and all working fine

it would be nice to know if something  was missing/wrong

Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #4 on: March 29, 2018, 06:52:59 AM »

Guys, it's a for sale topic. Stick to the topic.
I am not going to look over anyone's files, I have no interest in that.

If you want to, you can buy my sw and compare. But if it's exactly the same as yours, then well it's your loss Smiley
Logged

PM's will not be answered, so don't even try.
Log your car properly.
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 268



« Reply #5 on: March 30, 2018, 06:14:13 AM »

Can you explain a little further what kind of hardware changes need to be made and how tuning would be done after converted to SD? I am willing to pay for this but I'd just like to understand it a bit better before spending the $600+ USD.

I know a second map sensor would need to be installed post TB. Which sensor?
The second map sensor gets wired to the existing MAF input? Or other?

Thank you for posting this PRJ. I was actually considering messaging you about this the other day.
Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #6 on: March 30, 2018, 06:30:31 AM »

2nd MAP sensor is installed into the manifold and wired into the MAF harness. On the 2.7TT a good place to put it is the EVAP tap, if you're not using EVAP. If you are, you could get rid of the IAT and put it there for example (the MAP sensors have IAT built in anyway).
There is DSMGRAD and DSMOFS, just the same as there's DSLGRAD and DSLOFS.

VE tuning is done through KFURL, KFPRG, KFPBRK, KFPBRKNW.
Probably good to have an emulator the first time, as you are going to struggle a bit initially to get the VE tuned right if the engine is highly modified.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Bitshifter
Full Member
***

Karma: +10/-7
Offline Offline

Posts: 94


« Reply #7 on: May 02, 2018, 01:04:15 PM »

For sale:
Tested 5120 / SD files:
1.8T B5 - 8N0906018J
1.8T B6 - 8E0909518AL
2.7TT B5 - 8D0907551K
3.2 VR6 Mk4 - 022906032CN

And pretty much any other ME7 file for these modifications, but then it's minimum a day lead time to make it.
Prices start at 500 EUR depending on options chosen.

If you are turboing NA ME7, I have made a custom boost controller that can be integrated into the standard ECU outputting to the intake manifold changeover valve output (which can drive a N75).
Can work with MAF (ME3.8.3 style) or MAP signal without torque control issues.

Map switching based on rear o2 signal or pedals and adjustable launch control via pedals is also an option (incl. knock disable and antilag).

Do you offer it for MED9.1 (8P0907115H) too?
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #8 on: May 02, 2018, 11:28:35 PM »

No, I probably don't plan to sell any MED9/MED17 stuff through this forum.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Black_A4
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 51


« Reply #9 on: May 03, 2018, 11:58:45 PM »

Hi prj,

i would like to buy a file for the BAM CB which can use the rear O2 signal to switch the maps.

LC, AL and 5120 would be nice but not really needed.

The file should be able to switch the following maps

LDRXN
KRKTE
TVUB
FKKVS (would be nice)
TEMIN (would be nice)
KFFWL (would be nice)
LAMFA
TABGBTS (to switch off enrichment during LPG)
KFZW
KFZW2

Is that possible?
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #10 on: May 04, 2018, 04:09:05 AM »

Yes, it is possible. E-mail me.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)