Pages: [1]
Author Topic: Which Memory Layout i should choose  (Read 2459 times)
TurboBFBA4
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: February 17, 2018, 09:03:25 AM »

Hello,
I don't know which is the right memory layout in my 2002 Audi A4 B6 1.8T (BFB 163 HP). I would like to read the ECU Flash.
Every time i try to read the ECU, i receive at first the message that its unable to validate the memory layout.
Then the program show me a second message "Reading ECU flash memory failed".
After some trying and some times turning the ignition switch the program reads the memory without fail on every memory layout.
Can someone help me please ?  Wink
« Last Edit: February 17, 2018, 09:05:54 AM by TurboBFBA4 » Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12232


WWW
« Reply #1 on: February 17, 2018, 05:18:05 PM »

Please post the full output.

Don't post a screen shot, copy paste the actual text.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)