ME 3.8.3

Pages: 1 [2] 3 4 ... 9

« previous next »

Author

Topic: ME 3.8.3 (Read 168762 times)

blundar

Newbie

Karma: +11/-1
Offline

Offline

Posts: 22

	Re: ME 3.8.3 « Reply #15 on: January 19, 2011, 04:34:13 PM »

PVL,

"I'm already happy that i don't have to solder and socket stuff with these."

Care to elaborate a little more? I saw your post about +12V on pin 43. How do you read/program from there? If you could explain the algorithm or point me in the right direction on that I would greatly appreciate it. I still have three or four ECUs with chips desoldered off them in the basement - I'd love to not have to break out the hot air station so much.

I've already started trying to take apart the code with IDA. The 80C196 onboard in the ECU has 48k of onboard memory which I have not managed to read, yet. I can't figure out which address in the memory space the Flash chip occupies. I haven't been able to disassemble much of anything that makes sense from the flash chip, which is leading me to wonder if it is used exclusively for calibration data with the "operating system" if you will living inside the main processor. There are tons of tables obvious in the data structure of the 29F200, that's for sure...


	Logged

elRey

Hero Member

Karma: +32/-1
Offline

Offline

Posts: 565

	Re: ME 3.8.3 « Reply #16 on: January 19, 2011, 04:59:32 PM »

Quote from: pvl on January 19, 2011, 02:44:02 PM

The processor is a intel processor, so no ME7.x kinda
siemens comparable thing.

Try to download some original files, and winols will tell
you the processor, if it's known @ evc-germany and
they programmed the recognition in win-ols.

Processor: Intel 80196


	Logged

pvl

Sr. Member

Karma: +32/-1
Offline

Offline

Posts: 350

	Re: ME 3.8.3 « Reply #17 on: January 19, 2011, 05:52:58 PM »

Hi Dave,

After hot-air-reworking these, i get fed-up if wanted to tune them frequently.
Therefore, a nice interface like MPPS is the solution. Like i earlier described. No fuss,
and quick reprogramming of all flashrom-equipped ME3.8.3 and M5.92 ecu's.

Most of the files of these boxes are findable on the net, or on the very common ebay-dvd's
as these ecu's are a bit older than the newest ones in the current .a.g. cars.

That disassembling thing with IDA is very nice. If i had the time, i would also help with that.
I'm a bit of a lazy person, and i know for 101% that there is more info about (like a full
damos-file that explains all stuff. Then the disassembly with ida makes even more sense, and is speeded-up like LIGHTYEARS).
I would be happy to donate some cash on it, but no person yet has contacted me, that he has a full damos or a2L descriptionfile of a 3.8.3/M5.92 ecu..... sadly...

perhaps the one from kompresd can give us already some insight info as of map-positions/specific maps. As the 3.8.2 -> 3.8.3 is normally a slight update or enhancement.

A 1:1 comparisment would reveal more.... i think. Now i only have to find the time for this... As this is already complex stuff...

If you have a logging-device for obd2-ports, as of hardware ready to pass on, i can put it between the obd-plug and the benchflashcable what kinda handshaking and protocol is used to program them ecu's... any suggestions or tips ? wuold like to log K+CAN lines for studying the way they interact with the ecu.

Cheers,

PvL


	Logged

blundar

Newbie

Karma: +11/-1
Offline

Offline

Posts: 22

	Re: ME 3.8.3 « Reply #18 on: January 19, 2011, 08:05:39 PM »

You can construct a "vampire" device by using something like a MC33199 tied to a FTDI232. cheap, simple.


	Logged

blundar

Newbie

Karma: +11/-1
Offline

Offline

Posts: 22

	Re: ME 3.8.3 « Reply #19 on: January 30, 2011, 10:43:00 PM »

"Audi A3 8L 1.8T AGU ECUs
06A906018D - 0 261 204 254 - Bosch M3.8.2
06A906018AQ - 0 261 204 678 - Bosch M3.8.3
06A906018AR - 0 261 204 679 - Bosch M3.8.3
06A906018CJ - 0 261 206 516 - Bosch M3.8.3
06A906018CK - 0 261 206 515 - Bosch M3.8.3
06A906018R - 0 261 204 673 - Bosch M3.8.3

Golf MKIV 1J 1.8T AGU ECUs
06A906018R - 0 261 204 673 - Bosch M3.8.3
06A906018BB - 0 261 204 800 -
06A906018CG- 0 261 206 518 - Bosch M3.8.3
06A906018CH - 0 261 206 571 - Bosch M3.8.3

Skoda Octavia 1U 1.8T AGU ECUs
06A906018CF
06A906018DM
06A906018GB
06A906018GA - 0 261 206 519 - Bosch M3.8.3

Audi A4 B5 1.8T AEB 1996-1999
8D0907557 - Bosch M3.2
8D0907557E - Bosch M3.2.1
8D0907557M - 0 261 204 179 - Bosch M5.9.2 - OBDII Programable
8D0907557N - 0 261 204 179 / 0 261 204 178- Bosch M5.9.2 - OBDII Programable
8D0907557P - 0 261 204 258 / 0 261 204 581 - Bosch M5.9.2 - OBDII Programable - USA
8D0907557T - Bosch M3.8.2 - OBDII Not Programmable
8D0907558D - Bosch M3.8.2 - OBDII Not Programmable
8D0907558E - Bosch M3.8.2 - OBDII Not Programmable
8D0907558M - 0 261 204 179 - Bosch M5.9.2 - OBDII Programable
8D0907559 - 0 261 204 963 - Bosch M5.9.2 - OBDII Programable
8D0907559c - 0 261 206 315 - Bosch M5.9.2 - OBDII Programable - US"
http://forums.vwvortex.com/showthread.php?4678555-1.8t-AGU-unisettings-compatibility

I have 3 - 97-98 US 1.8T ECUs:
557P
558M
557N

They use an identical circuit board inside.


	Logged

ported2flow

Full Member

Karma: +2/-0
Offline

Offline

Posts: 78

	Re: ME 3.8.3 « Reply #20 on: February 15, 2011, 05:00:51 PM »

hey everyone...

this is my first post on this forum and i have to say i really like that.. besides that... i am very interested in the m3.8.3 infos and stuff and will try to give most info ive got... thanks


	Logged

eliotroyano

Hero Member

Karma: +48/-8
Offline

Offline

Posts: 825

	Re: ME 3.8.3 « Reply #21 on: February 20, 2011, 05:28:57 PM »

Quote from: blundar on January 30, 2011, 10:43:00 PM

I am glad to see that this info was very useful since I collected it. Wink


	Logged

eliotroyano

Hero Member

Karma: +48/-8
Offline

Offline

Posts: 825

	Re: ME 3.8.3 « Reply #22 on: February 20, 2011, 05:32:32 PM »

Quote from: elRey on January 18, 2011, 07:57:50 PM

From ecuconnections:

Quote

... All 5.92 ecus have 29f200 inside and are flashable. MPPS and SPI. However, you need to give 12V to pin 43 in order for these interfaces to be able to write.
Or, unsolder and solder.

ME 5.9.2 is closely related to ME3.8.3.
They are saying it's writable with 12v on pin 43 via MPPS or SPI. However, you CANNOT read the flash in any case and Galletto doesn't work at all.

I have been able to read the eeprom and flash memory inside an M383 and M592 ECUs using Monoscan. Of course I can not write it.


	Logged

eliotroyano

Hero Member

Karma: +48/-8
Offline

Offline

Posts: 825

	Re: ME 3.8.3 « Reply #23 on: February 20, 2011, 05:37:40 PM »

Quote from: blundar on July 01, 2010, 08:20:10 AM

I have a 98 A4 1.8tqm and I've been toying with the idea of messing with the ECU in it. I bought 2 or 3 557 and 558 ECUs to have as spares.

Dave can you post some front pics of the ECUs you have? I mean, the main circuit side of the ECUs. I will appreciate it. I have been playing around with M383 and M592 ecus and I want to check something about Audi M592 ECUs.
Thanks in advance for your help.


	Logged

jpi512

Newbie

Karma: +3/-0
Offline

Offline

Posts: 14

	Re: ME 3.8.3 « Reply #24 on: February 23, 2011, 04:17:24 PM »

hi to all
this is my contribution to this post.

this a damos file for a little old me3,8,3 ecu (0261204806)

btw... i use original MPPS interface, and its posible flash these type of ecus sending 12v thru OBD port with a little modification, 12v need to be sent in all write operation, and in a specific pin of obd port. in some cases will be necesary remove Fuse11

hope will be usefull

jpi


	Logged

jpi512

Newbie

Karma: +3/-0
Offline

Offline

Posts: 14

	Re: ME 3.8.3 « Reply #25 on: February 23, 2011, 04:22:40 PM »

sorry, here the file

jpi512


	Logged

pvl

Sr. Member

Karma: +32/-1
Offline

Offline

Posts: 350

	Re: ME 3.8.3 « Reply #26 on: February 23, 2011, 05:34:57 PM »

@ jpi512 :

Sorry to spoil your party, my friend. But i gotta correct your post a bit.

The damosfile you've posted, is a M3.82 NON-flash version, sadly. The
thread is about the 3.8.3 (flashable version) Have a look to my screen-
print i've made, rooting trough your damosfile that you've posted.

If you have more of these files, please look into them and see if one of
them does state M3.83, as we then have a winner !

Cheers,

PvL


	Logged

eliotroyano

Hero Member

Karma: +48/-8
Offline

Offline

Posts: 825

	Re: ME 3.8.3 « Reply #27 on: March 05, 2011, 10:51:56 PM »

Friends I think I found something related to descriptors of M383. Please can you check it out.


	Logged

pvl

Sr. Member

Karma: +32/-1
Offline

Offline

Posts: 350

	Re: ME 3.8.3 « Reply #28 on: March 06, 2011, 05:36:49 AM »

@ eliotroyano : Great !

Thank you very much. Now doing a Excell-port from this file and some
minor corrections on it.

I hope that this corresponds with one of the 3.83 files.
You don't happen to know the vag - or boschnumber of this dump ?

Will post the Excell-file of this asap

Greetings,

PvL


	Logged

pvl

Sr. Member

Karma: +32/-1
Offline

Offline

Posts: 350

	Re: ME 3.8.3 « Reply #29 on: March 06, 2011, 01:19:31 PM »

As promised, the excell-file.

Now trying to identify the source of this file....

Anyone who knows, please chime in.

Thanks,

PvL


	Logged

Pages: 1 [2] 3 4 ... 9

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 07:17:07 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search