Pages: [1]
Author Topic: NMAX Me7.1 - Passat V6  (Read 2924 times)
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« on: February 25, 2018, 04:29:54 PM »

Hi!

I used this damos files to found the maps on my original file. But i have problems to found the NMAX on my file.
I would like to change the RPM limit to 7.000.

And what i have to make for the gear changes in at the time that i like, for exemple 6.800 rpm? When i select manual mode, if i like to get a maximum rpm, the gearbox change in 6.000rpm.


help me please!

Thanks!
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #1 on: February 25, 2018, 05:54:03 PM »

Changing rev limiter in file on an automatic car is totally useless, because it will never go there.
Your answer lies in TCU.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #2 on: February 25, 2018, 08:38:25 PM »

Changing rev limiter in file on an automatic car is totally useless, because it will never go there.
Your answer lies in TCU.

I never read and edit a TCU File! Smiley

In 1.8 M3.8.2 MT, the rev limiter is like than me7.1?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)