NefMoto > Technical > Tuning > MED 17 fuel pressure control
Pages: [1]
« previous next »
Author Topic: MED 17 fuel pressure control  (Read 5535 times)
tezotto
Newbie
*

Karma: +1/-4
Offline Offline

Posts: 10
« on: March 06, 2018, 05:07:41 AM »
Hello everyone
I need to raise the fuel pressure in the med17 from 15 to 17Mpa, I made the same changes I did in a med9, but the requested pressure does not rise, the maps I changed were:
KFPRSOLHKS
KFPRSOLHMM
KFPRSOLHOM
KFPRSOLKH
KFPRSOLSCH
KLLFPRSG >>> (Axis)
KLPRMAX
PRSOLAP
PRMAX

Am I forgetting any?
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #1 on: March 06, 2018, 11:42:38 AM »
KLPRMAX map looks offset by 2 bytes
Logged
tezotto
Newbie
*

Karma: +1/-4
Offline Offline

Posts: 10
« Reply #2 on: March 06, 2018, 01:02:44 PM »
Quote from: gman86 on March 06, 2018, 11:42:38 AM
KLPRMAX map looks offset by 2 bytes

I already compensated for +2 bytes and -2 bytes but the map gets very distorted
Logged
ReproLogic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21
« Reply #3 on: March 06, 2018, 05:49:44 PM »
In my sw there are a single value to 150 bar.
Upload your file.
« Last Edit: March 07, 2018, 08:09:58 AM by ReproLogic » Logged
tezotto
Newbie
*

Karma: +1/-4
Offline Offline

Posts: 10
« Reply #4 on: March 07, 2018, 04:20:37 AM »
Quote from: ReproLogic on March 06, 2018, 05:49:44 PM
In my sw there are a single value to 150 mPa.
Upload your file.

is attached
Logged
ReproLogic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21
« Reply #5 on: March 07, 2018, 09:55:44 AM »
Try in 8 bits direction 58425 , change (117 006) to (132 208).
Yes this change the axis descriptor to the 6x1 map, but in my file works.  Huh
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #6 on: March 07, 2018, 04:34:51 PM »
Quote from: tezotto on March 07, 2018, 04:20:37 AM
is attached

It's offset like I said Smiley See attached image

0x5841A
Logged
ReproLogic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21
« Reply #7 on: March 07, 2018, 04:59:23 PM »
Thanks, man, mystery solved.
My damos are wrong, but I made it work with tests. Smiley
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #8 on: March 07, 2018, 06:39:30 PM »
Quote from: ReproLogic on March 07, 2018, 04:59:23 PM
Thanks, man, mystery solved.
My damos are wrong, but I made it work with tests. Smiley


Yes, there are a few A2Ls are that are out a little. KLPRMAX is a common one on MED9 and MED17
Logged
tezotto
Newbie
*

Karma: +1/-4
Offline Offline

Posts: 10
« Reply #9 on: March 08, 2018, 03:39:05 AM »
Many thanks Gman86, worked perfectly now.

When I compensated the 2 bytes was hot headed, after seeing your post I realized that I had made the compensation in the wrong way.

Thank you for being insistent on your statement!
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #10 on: March 10, 2018, 02:56:02 AM »
Quote from: tezotto on March 08, 2018, 03:39:05 AM
Many thanks Gman86, worked perfectly now.

When I compensated the 2 bytes was hot headed, after seeing your post I realized that I had made the compensation in the wrong way.

Thank you for being insistent on your statement!

No problem, glad it's sorted. As above, it's quite a common flaw with some of the A2Ls floating around. Hopefully you'll be seeing the requested pressure now!
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 12:47:00 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)