Pages: [1]
Author Topic: Touareg Kessy cloning (Siemens VDO)  (Read 807 times)
TRespect
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 47


« on: March 07, 2018, 03:06:08 PM »

I have kessy part number 3D0909135J.
I want to get a used kessy and clone mine onto it as a backup.
What tools do I need to acheive this?
I read about carprog. Can this be done with nefmoto soft and a ft232rl cable?
The kessy is a siemens VDO.
Logged
TRespect
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 47


« Reply #1 on: March 09, 2018, 03:03:47 AM »

No info?
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +43/-1
Offline Offline

Posts: 423


« Reply #2 on: March 10, 2018, 10:08:07 PM »

You can desolder the 93c86 or read with test clip and burn to replacement kessy.
Logged
TRespect
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 47


« Reply #3 on: March 11, 2018, 05:47:16 AM »

I prefer the test clip. Which tool?
carprog or other ?
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +43/-1
Offline Offline

Posts: 423


« Reply #4 on: March 11, 2018, 09:11:14 AM »

chip reader i use gq-4x
Logged
TRespect
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 47


« Reply #5 on: March 11, 2018, 10:37:16 AM »

I checked this tool. You have to desolder the eeprom. I'd rather not do that. Would carprog do the job with the clip adaptor?
Logged
TRespect
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 47


« Reply #6 on: March 11, 2018, 10:41:59 AM »

Anybody replaced a kessy part number 3D0909135J  with 3D0909135N ?
Logged
aef
Hero Member
*****

Karma: +38/-14
Offline Offline

Posts: 1031


« Reply #7 on: March 12, 2018, 12:57:22 AM »

I checked this tool. You have to desolder the eeprom. I'd rather not do that. Would carprog do the job with the clip adaptor?

wrong, you can use the a clip with this reader too

http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4406
Logged
TRespect
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 47


« Reply #8 on: March 12, 2018, 03:34:33 AM »

Thanks for the link. I'm new to all this :-)
I guess I'm going to go with CarProg:

http://codecard.eu/carprog/software/immobilizer/s4-7-kessy-tool-a8-toureg-phaeton-cayenne-pin-code-reader/prod_167.html
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0s, 0q)