Some files can share .xdf,
Only way to find out is open .bin file with said .xdf and see if stuff lines up.
If not, try a couple of others.
You might get lucky.

That is if you can't find or there isn't a .xdf for you ECU.

The easiest way would be to find a file and .xdf that matches and see how the maps are.
And then see if your .bin and .xdf combination looks similar.

If you can upload your orig file and a list of maps you need  i can gine you addresses. I think i have the hex and al2 or dam files fir one of the 032dm versions

Hello, cable won't come for a week or so. All I'm trying to do is 00 mslub and mslbas. I was thinking to grab an original 06A 906 032 DL file and do that in the meantime to practice. Am I looking in the hex editor to change those values? Do you have those maps? I just installed Tunerpro and Winols but am very novice at both. Also looking for the  evap.
CDLDP - Eurobyte - LDP Diagnosis
CDTES - Eurobyte - EVAP diagnosis
CLATEVE - EVAP plug
CLALDPE - LDP plug

Any help would be greatly appreciated.

All prokon maps in me7.5 032xx files are in the same location. Ill post the cla addresses for yah

Still waiting for cable. Turns out I have a 06A906032GH as per OBD scan tool. 2001 AWW Jetta 150hp 4 speed automatic. Question, could I flash an AWP tiptronic 5 speed automatic bin? I think I would have to do immo defeat. Would this be possible or is the ecu giving info for the tiptronic trasmisission and TCU? Any help would be greatly appreciated.