Pages: [1]
Author Topic: Audi a3 3.2 BUB DSG 022906032KC  (Read 6132 times)
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« on: March 12, 2018, 12:11:06 PM »

hi guys , bought a new car and readed with kess but with the tools i have it cant find checksums (mpps didnt work)
now i want to check if its already remapped or not

and is there a matching file of this engine with a definition file because all the files i found on here doenst look like the one i have,
already found some kfzw throtlle en torque maps butt wanted to be sure

ecu id :

HW: 0261201811
SW: 1037389085
VIN nr.: WAUZZZ8P88AXXXXXX
SW ver.:
Spare:
Engine: A3-3.2-DQ-EU4   
HW Ver.:
SW upg.: 022906032KC 1282

thanks Grin
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: March 12, 2018, 12:20:41 PM »

attached.
Logged
Kacza
Full Member
***

Karma: +20/-6
Offline Offline

Posts: 213


« Reply #2 on: March 12, 2018, 02:07:59 PM »

What kind of checksums is in this ECU?
Theoretically, it is ME7, but WinOLS does not recognize the ME7 sum.
Logged
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« Reply #3 on: March 12, 2018, 04:18:06 PM »

What kind of checksums is in this ECU?
Theoretically, it is ME7, but WinOLS does not recognize the ME7 sum.

i can only checksum the file with ecm titanium , me7sum winols ultimo etc didnt work. i did mk4 before and always worked but this is mk5 with a me7.1.1 and dont recognize other mk5 r32 files to. (med9 etc did work) so i think i need to update my winols checksums
Logged
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« Reply #4 on: March 12, 2018, 04:26:59 PM »

attached.

thanks Grin
but i dont know how to use a sgo file but i will find out on the forum , new things to learn  Smiley
Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 442


« Reply #5 on: March 13, 2018, 02:45:30 AM »

As a lot of people wrote multiple times and as an owner of such car/engine i can tell you what exactly works in this ecu.

If you read it in boot you can put mpc and flash into one ols project and the cksum will be fixed properly.

CMD can successfully flash this car from obd (only the 29f800).

Ktag works perfect in boot mode too.
Logged
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« Reply #6 on: March 14, 2018, 03:22:32 AM »

As a lot of people wrote multiple times and as an owner of such car/engine i can tell you what exactly works in this ecu.

If you read it in boot you can put mpc and flash into one ols project and the cksum will be fixed properly.

CMD can successfully flash this car from obd (only the 29f800).

Ktag works perfect in boot mode too.

Oke i will try it this way , tnks a lot!
Logged
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« Reply #7 on: March 14, 2018, 12:54:18 PM »

Didnt think about the anti-theft housing so i will open it when i have time , can you maybe please tell me the adress of vmax. Did some searching in the file i have read with kess but couldnt find it.
Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 442


« Reply #8 on: March 15, 2018, 03:04:18 AM »

Some of us do this for a leaving so i guess you know what this means...
Logged
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« Reply #9 on: March 17, 2018, 09:08:30 AM »

Some of us do this for a leaving so i guess you know what this means...

ofcourse i understand !
Logged
johnnc
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #10 on: October 17, 2018, 03:47:07 AM »

Hello
you have full back up ?
thank-you
John
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 18 queries. (Pretty URLs adds 0s, 0q)