Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
Requested vacuum not meeting actual vacuum
Pages: [
1
]
« previous
next »
Author
Topic: Requested vacuum not meeting actual vacuum (Read 2543 times)
Cadensdad14
Full Member
Karma: +8/-1
Offline
Posts: 134
Requested vacuum not meeting actual vacuum
« on: March 25, 2018, 01:49:11 PM »
I am working on honing in a new set of injectors on my 1.8t awm ch box a4 and I can't seem to get idle stable, but after looking into my issues, I feel its a vacuum leak. Could anyone take a look at these logs, specifically requested pressure vs actual pressure.
Logged
nyet
Administrator
Hero Member
Karma: +607/-168
Online
Posts: 12256
Re: Requested vacuum not meeting actual vacuum
« Reply #1 on: March 25, 2018, 04:54:47 PM »
req/actual pressure are only relevant for WG control.
vac leaks are more easily seen in fuel trims.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Cadensdad14
Full Member
Karma: +8/-1
Offline
Posts: 134
Re: Requested vacuum not meeting actual vacuum
« Reply #2 on: March 25, 2018, 06:00:11 PM »
Ok. Ill recheck fuel trims. I have krkte nailed down and ill use fkkvs to fine tune inconsistencies.
On a side note, I'm hoping to add more load and the maps max out at 140. The 225 BAM has longer maps, but runs a lower compression ratio and ive noticed when maps are aligned the BAM has more spark advance. Would you interpolate the ch maps for higher loads, or would you interpolate the 2.7t mbox maps with equal compression and displacement per cylinder, or adjust the axes for the BAM to accept the 2.7t maps?
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 15, 2024, 01:04:59 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
