Pages: [1]
Author Topic: Changing octane rating for an ECU/Tune  (Read 2875 times)
boneskid1
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: March 26, 2018, 09:36:31 PM »

Is is possible to change the octane rating a tune looks for?

I purchased a second hand tuned ecu that I was told was setup for 91/93, but after some complications (car dying with the tuned ecu) I do not think this is the case. Sadly where I live I only have access to 91 octane not 93. I tried to google the subject a little bit, but found no helpful information.


Any input is greatly appreciated!

P.S. this is for my AWP 1.8t mk4 gti

 

« Last Edit: March 26, 2018, 09:38:11 PM by boneskid1 » Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #1 on: March 26, 2018, 10:34:25 PM »

it should be fine.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
boneskid1
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #2 on: March 27, 2018, 11:35:02 PM »

91 on a tune designed for 93? I was told by multiple tuners to not to mix octane ratings if I can help it for the safety of my engine.
Logged
bobbyz0r
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 43


« Reply #3 on: March 27, 2018, 11:42:20 PM »

Compared to 93 AKI, 91 AKI has a lower knock resistance. So in general, you'll want to retard ignition timing, decrease boost pressure and probably run a little richer.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #4 on: March 28, 2018, 12:47:35 PM »

OEM knock recognition will work down to 87 oct, unless the tuner numbed it intentionally. You won't make as much power as a tune made specifically for 91, but it should be more or less safe.

If you do not know what your tuner did, you have a few choices:

1) don't worry about it
2) ask your tuner to fix it
3) revert to stock
4) DIY your own tune based on stock

Do not modify tuner files.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)