Pages: [1]
Author Topic: Pre-cat delete O2 sensor high resistance  (Read 4210 times)
streacy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 105


« on: March 29, 2018, 02:22:59 PM »

Hi all,

I previous got help from a lot of you when deleting my rear 02 sensors and think you may be able to help me again. While doing my timing belt and water pump the car was lying up a while so I removed my down pipes and delete both pre cats. Great job car feels a lot better but now I am getting bank 1 & bank 2 front 02 sensors high resistance codes. I originally deleted my rear 02 sensors so this wouldn’t happen. Bearing in mind now my rear 02’s are still plugged in. I think it’s unlikely that both O2 sensors are gone, any definative way of checking them?

Any help would be appreciated, thanks.
Logged
streacy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 105


« Reply #1 on: March 31, 2018, 10:23:40 AM »

Also car is 2002 2.7t tip allroad ARE engine.
Logged
prj
Hero Member
*****

Karma: +903/-420
Online Online

Posts: 5789


« Reply #2 on: March 31, 2018, 02:51:07 PM »

If they are properly deleted, unplug them.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
streacy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 105


« Reply #3 on: April 11, 2018, 03:26:44 PM »

Thanks prj, unplugged them and cleared all codes. No engine light for a day then same high resistance codes on bank 1 sensor 1 and 2. Probably should post some logs, what should I log/look for? Thanks
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #4 on: April 11, 2018, 06:37:11 PM »

Thanks prj, unplugged them and cleared all codes. No engine light for a day then same high resistance codes on bank 1 sensor 1 and 2. Probably should post some logs, what should I log/look for? Thanks

bank 1 sensor 1 is front o2
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #5 on: April 11, 2018, 11:41:20 PM »

Are you sure they are deleted properly?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)