Pages: [1] 2 3
Author Topic: review mi log bam 1.8t cupra r  (Read 20081 times)
jjuuaannk
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 89



« on: April 02, 2018, 09:56:43 AM »

hello this is my first log with m7logger after making it connect, if some expert could take a look?

thanks you
Logged

Leon Cupra R 1M
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #1 on: April 02, 2018, 10:22:45 AM »

How did you manage to forget to log RPM?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
jjuuaannk
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 89



« Reply #2 on: April 02, 2018, 04:10:00 PM »

 Angry im sorry, add new
Logged

Leon Cupra R 1M
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: April 02, 2018, 04:25:11 PM »

wastegate maxed out and underboosting, fuel maxed out and lean.

Not great.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #4 on: April 02, 2018, 11:56:51 PM »

Knock Knock.
Logged
jjuuaannk
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 89



« Reply #5 on: April 03, 2018, 05:59:55 AM »

wastegate maxed out and underboosting, fuel maxed out and lean.

Not great.

thanks for seeing it,

I have a wideband aem and I have noticed that the afr in idle sometimes gets me in 11 I have to see what happens sometimes it returns to normal at 15, 16

On the other hand, you say you are requesting more boost, than the one you can deliver?

Thank you
Logged

Leon Cupra R 1M
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #6 on: April 03, 2018, 06:01:01 AM »

16 is not normal.  11 at idle is also not normal.

And yes, that is what Nyet is saying.
Logged
jjuuaannk
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 89



« Reply #7 on: April 03, 2018, 06:03:56 AM »

Knock Knock.

hello friend, I've always had a bit of knock and delay in time everything depends on the gasoline that leads at the moment and whether it is methanol or not, but I'm not at the limit right?
Logged

Leon Cupra R 1M
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #8 on: April 03, 2018, 06:05:52 AM »

Limit?  10 degrees is WAY too much.  12 is the limit.  It's not a target though.
Logged
jjuuaannk
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 89



« Reply #9 on: April 03, 2018, 06:08:48 AM »

Limit?  10 degrees is WAY too much.  12 is the limit.  It's not a target though.

I understand and the end is something that does not take advantage
Logged

Leon Cupra R 1M
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #10 on: April 03, 2018, 06:11:09 AM »

You want a few degrees at most.  10 is ripping the kent.
Logged
jjuuaannk
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 89



« Reply #11 on: April 03, 2018, 06:23:51 AM »

You want a few degrees at most.  10 is ripping the kent.

thanks for your advice, I will try to reduce kfzw a little
Logged

Leon Cupra R 1M
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #12 on: April 03, 2018, 06:24:24 AM »

Fueling is the problem.
Logged
jjuuaannk
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 89



« Reply #13 on: April 03, 2018, 06:30:10 AM »

Fueling is the problem.

the supply or quality? use petrol 95 octane
Logged

Leon Cupra R 1M
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #14 on: April 03, 2018, 06:36:56 AM »

Both.

95 ron and 41 degree inlet temps, 1.4bar, >0.87 lambda in parts?  Daft.
Logged
Pages: [1] 2 3
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)