Pages: [1]
Author Topic: The rare VW Sharan 1.8T Inlet Manifold  (Read 1641 times)
Full Member

Karma: +2/-26
Offline Offline

Posts: 151

« on: March 13, 2018, 02:18:40 PM »

Hi people,

I was searching my container where I had some parts from years back to look for some 1.8T components that might be of use. AND I found a 1.8T Big port Inlet manifold from a VW Sharan that is pretty rare to find since it is large port, throttle body on right side for FMIC setup, AND looks pretty cool to me.

However, I'm not sure how well it can flow compared to the normal ones. The runners are a bit thicker in the end side compared to the normal one. What do you guys think, is it a worse design? Take a look.
Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 18 queries. (Pretty URLs adds 0s, 0q)