Pages: [1]
Author Topic: help with haldex gen 1 65535 - internal control module memory error  (Read 4762 times)
baigencho
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10



I have some problem with my haldex gen1 "65535 - internal control module memory error 00--00--" , i opened the but all is ok,haldex sometimes when i drive don`t work
all the cables is OK, i see in vag com in chanel 22 when i pass the output tests the voltage drop from 12.30v to 0.70v  about a minute and up to normal voltage pass that time. I was surching some info about this problem but there is no much info  



Logged
baigencho
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #1 on: April 13, 2018, 08:20:50 AM »

Or if somebody do something like arduino to eliminate the stock ecu  Huh Embarrassed
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #2 on: April 13, 2018, 09:59:39 AM »

Definitely sounds like an electrical k-line/can issue.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
baigencho
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #3 on: April 24, 2018, 08:30:11 AM »

with vagcom in chanel CANBUS is all ok  Huh Huh Huh
Logged
rafcio363
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #4 on: July 13, 2019, 01:05:50 AM »

Did you fix it?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)